EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electrospun Poly(butylene 2,5-furanoate) and Poly(pentamethylene 2,5-furanoate) Mats: Structure–Property Relationships and Thermo-Mechanical and Biological Characterization

Giulia Fredi iD, Sofia Santi iD, Michelina Soccio iD, Nadia Lotti iD, Andrea Dorigato iD

Molecules · 12.02.2025 · 30 (4) · 841

DOI: 10.3390/molecules30040841 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Molecules, online erschienen am 12.02.2025. Verfasst von Giulia Fredi und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial Engineering and INSTM Research Unit, University of Trento Via Sommarive 9, 38123 Trento, Italy. Hauptthemen laut MEDLINE: Polymers, Furans, Biocompatible Materials. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fondazione Cassa di Risparmio di Trento e Rovereto (CARITRO), European Cooperation in Science and Technology (COST), COST (European Cooperation in Science and Technology).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study explores, for the first time, the application of electrospun biobased poly(butylene 2,5-furanoate) (PBF) and poly(pentamethylene 2,5-furanoate) (PPeF) mats in biomedical and drug delivery fields, through a careful investigation of their structure–property relationship. PBF mats, with a glass transition temperature (Tg) of 25–30 °C and an as-spun crystallinity of 18.8%, maintained their fibrous structure (fiber diameter ~1.3 µm) and mechanical properties (stiffness ~100 MPa, strength ~4.5 MPa, strain at break ~200%) under treatment in physiological conditions (37 °C, pH 7.5). In contrast, PPeF mats, being amorphous with a Tg of 14 °C, underwent significant densification, with geometrical density increasing from 0.68 g/cm³ to 1.07 g/cm³, which depressed the specific (i.e., normalized by density) mechanical properties. DSC analysis revealed that the treatment promoted crystallization in PBF (reaching 45.9% crystallinity), while PPeF showed limited, but interestingly not negligible, structural reorganization. Both materials promoted good cell adhesion and were biocompatible, with lactate dehydrogenase release not exceeding 20% after 48 h. The potential of PBF mats for drug delivery was evaluated using dexamethasone. The mats exhibited a controlled drug release profile, with ~10% drug release in 4 h and ~50% in 20 h. This study demonstrates the versatility of these biopolyesters in biomedical applications and highlights the impact of polymer structure on material performance.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

PolymersFuransBiocompatible MaterialsTemperatureStructure-Activity RelationshipHumansButylene Glycols

Stichwörter der Autor:innen

biocompatibilitybiopolymersdrug deliveryelectrospinningfuranoate polyestersmechanical properties

Substanzen

PolymersFuransBiocompatible MaterialsbionoleButylene Glycols

Autor:innen und Institutionen

  • Department of Industrial Engineering and INSTM Research Unit, University of Trento Via Sommarive 9, 38123 Trento, Italy.
  • Department of Civil, Chemical, Environmental, and Materials Engineering, University of Bologna, Via Terracini 28, 40131 Bologna, Italy.
  • Interdepartmental Center for Industrial Research on Advanced Applications in Mechanical Engineering and Materials Technology, CIRI-MAM, Viale del Risorgimento 2, 40136 Bologna, Italy.
  • Interdepartmental Center for Industrial Research on Buildings and Construction CIRI-EC, Via del Lazzaretto 15/5, 40131 Bologna, Italy.
  • Interdepartmental Center for Industrial Agro-Food Research, CIRI-AGRO, Via Quinto Bucci 336, 47521 Cesena, Italy.

ORCID-Profile: Giulia Fredi, Sofia Santi, Michelina Soccio, Nadia Lotti, Andrea Dorigato

Förderung

  • Fondazione Cassa di Risparmio di Trento e Rovereto (CARITRO)
  • European Cooperation in Science and Technology (COST)
  • COST (European Cooperation in Science and Technology)

Zitieren

APA

Fredi, G., Santi, S., Soccio, M., Lotti, N., & Dorigato, A. (2025). Electrospun Poly(butylene 2,5-furanoate) and Poly(pentamethylene 2,5-furanoate) Mats: Structure–Property Relationships and Thermo-Mechanical and Biological Characterization. Molecules, 30(4), 841. https://doi.org/10.3390/molecules30040841

Vancouver

Fredi G, Santi S, Soccio M, Lotti N, Dorigato A. Electrospun Poly(butylene 2,5-furanoate) and Poly(pentamethylene 2,5-furanoate) Mats: Structure–Property Relationships and Thermo-Mechanical and Biological Characterization. Molecules. 2025;30(4):841. doi:10.3390/molecules30040841

BibTeX
@article{Fredi2025,
  author = {Fredi, Giulia and Santi, Sofia and Soccio, Michelina and Lotti, Nadia and Dorigato, Andrea},
  title = {Electrospun Poly(butylene 2,5-furanoate) and Poly(pentamethylene 2,5-furanoate) Mats: Structure–Property Relationships and Thermo-Mechanical and Biological Characterization},
  journal = {Molecules},
  year = {2025},
  volume = {30},
  number = {4},
  pages = {841},
  doi = {10.3390/molecules30040841}
}
Kostenlos starten →