EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Preparation of High-Toughness Lignin Phenolic Resin Biomaterials Based via Polybutylene Succinate Molecular Intercalation

Jin Xie, Hao Sun, Yuchun Yang, Junxiong Liang, Yun Li, Defa Hou, Xu Lin, Jun Zhang iD, Zhengjun Shi, Can Liu iD

International Journal of Molecular Sciences · 2023

DOI: 10.3390/ijms24076418 ↗

Kurz gefasst

Fachartikel in der Zeitschrift International Journal of Molecular Sciences, 2023. Verfasst von Jin Xie und 9 weiteren Autor:innen. Beteiligte Einrichtung: International Joint Research Center for Biomass Materials, Southwest Forestry University, Kunming 650224, China. Hauptthemen laut MEDLINE: Lignin, Biocompatible Materials. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Southwest Forestry University, Programs of Yunnan Province, International Joint Research Center for Biomass Materials.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Lignin has many potential applications and is a biopolymer with a three-dimensional network structure. It is composed of three phenylpropane units, p-hydroxyphenyl, guaiacyl, and syringyl, connected by ether bonds and carbon–carbon bonds, and it contains a large number of phenol or aldehyde structural units, resulting in complex lignin structures. This limits the application of lignin. To expand the application range of lignin, we prepared lignin thermoplastic phenolic resins (LPRs) by using lignin instead of phenol; these LPRs had molecular weights of up to 1917 g/mol, a molecular weight distribution of 1.451, and an O/P value of up to 2.73. Due to the complex structure of the lignin, the synthetic lignin thermoplastic phenolic resins were not very tough, which greatly affected the performance of the material. If the lignin phenolic resins were toughened, their application range would be substantially expanded. Polybutylene succinate (PBS) has excellent processability and excellent mechanical properties. The toughening effects of different PBS contents in the LPRs were investigated. PBS was found to be compatible with the LPRs, and the flexible chain segments of the small PBS molecules were embedded in the molecular chain segments of the LPRs, thus reducing the crystallinities of the LPRs. The good compatibility between the two materials promoted hydrogen bond formation between the PBS and LPRs. Rheological data showed good interfacial bonding between the materials, and the modulus of the high-melting PBS made the LPRs more damage resistant. When PBS was added at 30%, the tensile strength of the LPRs was increased by 2.8 times to 1.65 MPa, and the elongation at break increased by 31 times to 93%. This work demonstrates the potential of lignin thermoplastic phenolic resins for industrial applications and provides novel concepts for toughening biobased aromatic resins with PBS.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

LigninBiocompatible MaterialsPhenolsResins, SyntheticFormaldehydePolymersButylene Glycols

Stichwörter der Autor:innen

biomaterialsintercalation methodligninpolybutylene succinatetoughening

Substanzen

LigninBiocompatible MaterialsPhenolsResins, Syntheticphenol-formaldehyde resinFormaldehydePolymersbionoleButylene Glycols

Autor:innen und Institutionen

  • International Joint Research Center for Biomass Materials, Southwest Forestry University, Kunming 650224, China.
  • Graduate School of Agriculture, Kyoto University, Kyoto 606-8502, Japan.

ORCID-Profile: Jun Zhang, Can Liu

Förderung

  • Southwest Forestry University
  • Programs of Yunnan Province
  • International Joint Research Center for Biomass Materials

Zitieren

APA

Xie, J., Sun, H., Yang, Y., Liang, J., Li, Y., Hou, D., Lin, X., Zhang, J., Shi, Z., & Liu, C. (2023). Preparation of High-Toughness Lignin Phenolic Resin Biomaterials Based via Polybutylene Succinate Molecular Intercalation. International Journal of Molecular Sciences. https://doi.org/10.3390/ijms24076418

Vancouver

Xie J, Sun H, Yang Y, Liang J, Li Y, Hou D, et al. Preparation of High-Toughness Lignin Phenolic Resin Biomaterials Based via Polybutylene Succinate Molecular Intercalation. International Journal of Molecular Sciences. 2023. doi:10.3390/ijms24076418

BibTeX
@article{Xie2023,
  author = {Xie, Jin and Sun, Hao and Yang, Yuchun and Liang, Junxiong and Li, Yun and Hou, Defa and Lin, Xu and Zhang, Jun and Shi, Zhengjun and Liu, Can},
  title = {Preparation of High-Toughness Lignin Phenolic Resin Biomaterials Based via Polybutylene Succinate Molecular Intercalation},
  journal = {International Journal of Molecular Sciences},
  year = {2023},
  doi = {10.3390/ijms24076418}
}
Kostenlos starten →