EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In Situ-Initiated Poly-1,3-dioxolane Gel Electrolyte for High-Voltage Lithium Metal Batteries

Mingyang Xin, Yimu Zhang, Zhenhua Liu, Yuqing Zhang, Yutong Zhai, Haiming Xie, Yulong Liu

Molecules · 23.05.2024 · 29 (11) · 2454

DOI: 10.3390/molecules29112454 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Molecules, online erschienen am 23.05.2024. Verfasst von Mingyang Xin und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemistry, Northeast Normal University, Changchun 130024, China. Die Arbeit wurde bisher 15-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Jilin Province Science and Technology Department major science and technology project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To realize high-energy-density Li metal batteries at low temperatures, a new electrolyte is needed to solve the high-voltage compatibility and fast lithium-ion de-solvation process. A gel polymer electrolyte with a small-molecular-weight polymer is widely investigated by combining the merits of a solid polymer electrolyte (SPE) and liquid electrolyte (LE). Herein, we present a new gel polymer electrolyte (P-DOL) by the lithium difluoro(oxalate)borate (LiDFOB)-initiated polymerization process using 1,3-dioxolane (DOL) as a monomer solvent. The P-DOL presents excellent ionic conductivity (1.12 × 10−4 S cm−1) at −20 °C, with an oxidation potential of 4.8 V. The Li‖LiCoO2 cell stably cycled at 4.3 V under room temperature, with a discharge capacity of 130 mAh g−1 at 0.5 C and a capacity retention rate of 86.4% after 50 cycles. Moreover, a high-Ni-content LiNi0.8Co0.1Mn0.1O2 (NCM811) cell can steadily run for 120 cycles at −20 °C, with a capacity retention of 88.4%. The underlying mechanism of high-voltage compatibility originates from the dense and robust B- and F-rich cathode interface layer (CEI) formed at the cathode interface. Our report will shed light on the real application of Li metal batteries under all-climate conditions in the future.

Schlagwörter

Stichwörter der Autor:innen

gel polymer electrolytehigh-voltage cathodelithium metal batterylow temperatures

Autor:innen und Institutionen

  • School of Chemistry, Northeast Normal University, Changchun 130024, China.

Förderung

  • National Natural Science Foundation of China
  • Jilin Province Science and Technology Department major science and technology project

Zitieren

APA

Xin, M., Zhang, Y., Liu, Z., Zhang, Y., Zhai, Y., Xie, H., & Liu, Y. (2024). In Situ-Initiated Poly-1,3-dioxolane Gel Electrolyte for High-Voltage Lithium Metal Batteries. Molecules, 29(11), 2454. https://doi.org/10.3390/molecules29112454

Vancouver

Xin M, Zhang Y, Liu Z, Zhang Y, Zhai Y, Xie H, et al. In Situ-Initiated Poly-1,3-dioxolane Gel Electrolyte for High-Voltage Lithium Metal Batteries. Molecules. 2024;29(11):2454. doi:10.3390/molecules29112454

BibTeX
@article{Xin2024,
  author = {Xin, Mingyang and Zhang, Yimu and Liu, Zhenhua and Zhang, Yuqing and Zhai, Yutong and Xie, Haiming and Liu, Yulong},
  title = {In Situ-Initiated Poly-1,3-dioxolane Gel Electrolyte for High-Voltage Lithium Metal Batteries},
  journal = {Molecules},
  year = {2024},
  volume = {29},
  number = {11},
  pages = {2454},
  doi = {10.3390/molecules29112454}
}
Kostenlos starten →