EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Ionic Liquid Boosting the Electrochemical Stability of a Poly(1,3‐dioxolane) Gel Electrolyte for High‐voltage Solid‐State Lithium Batteries

Tianhua Chen, Jiaxin Liu, Dusan Losic, Jian Wang, Haitao Zhang iD

ChemSusChem · 08.03.2024 · 17 (5)

DOI: 10.1002/cssc.202301242 ↗

Kurz gefasst

Fachartikel in der Zeitschrift ChemSusChem, online erschienen am 20.11.2023. Verfasst von Tianhua Chen und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical Engineering and Advanced Materials, The University of Adelaide, Adelaide, SA-5005, Australia. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Australian Government, Australian Research Council (ARC), ARC research Hub for Graphene enabled industry transformation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Poor interfacial contact between solid‐state electrolytes and electrodes limits high‐voltage performance of solid‐state lithium batteries. A new gel electrolyte is proposed via in‐situ polymerization, incorporating fluoroethylene carbonate (FEC) solvent and ionic liquid1‐butyl‐1‐methylpiperidinium bis(trifluoromethylsulfonyl)imide (PP 14 TFSI). This combination synergistically enhances Li ion transport, achieving a transfer number of 0.58 and improved electrochemical performance. FEC protects the Al current collectors from LiPF 6 corrosion and promotes a protective interfacial layer formation. PP 14 TFSI improves interfacial contact and provides stable components. An interface layer of fluorine and nitrogen composites forms, preventing side reactions. LiCoO 2 ||PPE||Li cell exhibits robust cycling stability at 4.45 V, retaining ~80 % capacity after 200 cycles at room temperature with 0.2 C and 1 C rates, showing increased coulombic efficiency. NCM811||PPE||Li cell also displays exceptional cycling. In‐situ polymerization and FEC‐ionic liquid coordination enable high‐voltage solid‐state lithium metal batteries for practical use.

Schlagwörter

Stichwörter der Autor:innen

FEC solventHigh-voltageIn-situ polymerizationInterfacial layerIonic liquid

Autor:innen und Institutionen

  • School of Chemical Engineering and Advanced Materials, The University of Adelaide, Adelaide, SA-5005, Australia.
  • Institute of Process Engineering, Chinese Academy of Sciences, 100190, Beijing, P. R. China.
  • College of Chemical Engineering, Shenyang University of Chemical Technology, Shenyang, 110142, P. R. China.
  • Helmholtz Institute Ulm (HIU), 89081, Ulm, Germany.

ORCID-Profile: Haitao Zhang

Förderung

  • Australian Government
  • Australian Research Council (ARC)
  • ARC research Hub for Graphene enabled industry transformation
  • ZhongKe-YuNeng Joint R&D center
  • International Cooperative Project of CAS
  • Natural Science Foundation of Jiangsu Province
  • Innovative and Entrepreneurial Doctor in Jiangsu Province

Zitieren

APA

Chen, T., Liu, J., Losic, D., Wang, J., & Zhang, H. (2024). Ionic Liquid Boosting the Electrochemical Stability of a Poly(1,3‐dioxolane) Gel Electrolyte for High‐voltage Solid‐State Lithium Batteries. ChemSusChem, 17(5). https://doi.org/10.1002/cssc.202301242

Vancouver

Chen T, Liu J, Losic D, Wang J, Zhang H. Ionic Liquid Boosting the Electrochemical Stability of a Poly(1,3‐dioxolane) Gel Electrolyte for High‐voltage Solid‐State Lithium Batteries. ChemSusChem. 2024;17(5). doi:10.1002/cssc.202301242

BibTeX
@article{Chen2024,
  author = {Chen, Tianhua and Liu, Jiaxin and Losic, Dusan and Wang, Jian and Zhang, Haitao},
  title = {Ionic Liquid Boosting the Electrochemical Stability of a Poly(1,3‐dioxolane) Gel Electrolyte for High‐voltage Solid‐State Lithium Batteries},
  journal = {ChemSusChem},
  year = {2024},
  volume = {17},
  number = {5},
  doi = {10.1002/cssc.202301242}
}
Kostenlos starten →