EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Modified Supporting Materials to Fabricate Form Stable Phase Change Material with High Thermal Energy Storage

Chengbin Yu iD, Youngseok Song

Molecules · 30.01.2023 · 28 (3) · 1309

DOI: 10.3390/molecules28031309 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Molecules, online erschienen am 30.01.2023. Verfasst von Chengbin Yu und 1 weiteren Autor:innen. Beteiligte Einrichtung: Research Institute of Advanced Materials (RIAM), Department of Materials Science and Engineering, Seoul National University, Seoul 08826, Republic of…. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: GRRC program of Gyeonggi Province, Ministry of Education.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thermal energy storage (TES) is vital to the absorption and release of plenty of external heat for various applications. For such storage, phase change material (PCM) has been considered as a sustainable energy material that can be integrated into a power generator. However, pure PCM has a leakage problem during the phase transition process, and we should fabricate a form stable PCM composite using some supporting materials. To prevent the leakage problem during the phase transition process, two different methods, microencapsulation and 3D porous infiltration, were used to fabricate PCM composites in this work. It was found that both microsphere and 3D porous aerogel supported PCM composites maintained their initial solid state without any leakage during the melting process. Compared with the microencapsulated PCM composite, the 3D porous aerogel supported PCM exhibited a relatively high weight fraction of working material due to its high porosity. In addition, the cross-linked graphene aerogel (GCA) could reduce volume shrinkage effectively during the infiltration process, and the GCA supported PCM composite kept a high latent heat (∆H) and form stability.

Schlagwörter

Stichwörter der Autor:innen

leakagephase change materialthermal energy storagevolume shrinkage

Autor:innen und Institutionen

  • Research Institute of Advanced Materials (RIAM), Department of Materials Science and Engineering, Seoul National University, Seoul 08826, Republic of Korea.
  • Department of Fiber Convergence Materials Engineering, Dankook University, Yongin-si 16890, Republic of Korea.

ORCID-Profile: Chengbin Yu

Förderung

  • GRRC program of Gyeonggi Province
  • Ministry of Education

Zitieren

APA

Yu, C., & Song, Y. (2023). Modified Supporting Materials to Fabricate Form Stable Phase Change Material with High Thermal Energy Storage. Molecules, 28(3), 1309. https://doi.org/10.3390/molecules28031309

Vancouver

Yu C, Song Y. Modified Supporting Materials to Fabricate Form Stable Phase Change Material with High Thermal Energy Storage. Molecules. 2023;28(3):1309. doi:10.3390/molecules28031309

BibTeX
@article{Yu2023,
  author = {Yu, Chengbin and Song, Youngseok},
  title = {Modified Supporting Materials to Fabricate Form Stable Phase Change Material with High Thermal Energy Storage},
  journal = {Molecules},
  year = {2023},
  volume = {28},
  number = {3},
  pages = {1309},
  doi = {10.3390/molecules28031309}
}
Kostenlos starten →