EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Study on a Novel Form-Stable Phase Change Material Based on Solid Waste Iron Tailings as Supporting Material for Thermal Energy Storage

Peng Liu, Yajing Wang, Zhao Liang, Zhikai Zhang, Jun Rao, Shuai Jiang

Energies · 11.10.2023 · 16 (20) · 7037

DOI: 10.3390/en16207037 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Energies, online erschienen am 11.10.2023. Verfasst von Peng Liu und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key R&D Projects of Tibet Autonomous Region Science and Technology Program, Science and Technology Project of Hebei Education Department, Key Technology R&D Program of Hebei Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To prevent liquid leakage during the phase transition of a phase change material (PCM), a novel form-stable PCM (FSPCM) based on LA/CIT/CNT was fabricated using a simple and facile direct impregnation method. The iron tailings (ITs) was calcinated at first. And then lauric acid (LA) was impregnated into the calcinated iron tailings (CITs) with carbon nanotubes (CNTs) as a thermal conductivity additive. Subsequently, the leakage tests and the properties of the prepared samples were investigated by diffusion-oozing testing (DOT), SEM, XRD, FTIR, DSC, TGA, and intelligent paperless recorder (IPR). DOT results showed that the impregnation ratio of LA into the CIT and CNT was up to 27.5% without leakage. SEM indicated that LA can be adsorbed into microscale pores and covered the surface of CITs and CNTs. FTIR spectra indicated that there was no chemical reaction during the preparation process. The melting and freezing temperatures of the prepared LA/CIT/CNT FSPCMs were measured as 45.24 °C and 39.61 °C, respectively. Correspondingly, the latent heat values were determined as 39.95 J/g and 35.63 J/g, respectively. The LA/CIT/CNT FSPCMs exhibited good thermal stability in the working temperature range, and its heat transfer efficiency was improved significantly by 69.23% for LA and 84.62% for LA/CIT FSPCM. In short, LA/CIT/CNT FSPCMs are a very promising material for thermal energy storage in practical low-temperature applications.

Förderung

  • Key R&D Projects of Tibet Autonomous Region Science and Technology Program
  • Science and Technology Project of Hebei Education Department
  • Key Technology R&D Program of Hebei Province
  • Funding Projects that guide local for scientific and technological development of Hebei Provincial Department of Science and Technology
  • Open Foundation of Hebei Key Laboratory of Green Development of Rock and Mineral Materials

Zitieren

APA

Liu, P., Wang, Y., Liang, Z., Zhang, Z., Rao, J., & Jiang, S. (2023). Experimental Study on a Novel Form-Stable Phase Change Material Based on Solid Waste Iron Tailings as Supporting Material for Thermal Energy Storage. Energies, 16(20), 7037. https://doi.org/10.3390/en16207037

Vancouver

Liu P, Wang Y, Liang Z, Zhang Z, Rao J, Jiang S. Experimental Study on a Novel Form-Stable Phase Change Material Based on Solid Waste Iron Tailings as Supporting Material for Thermal Energy Storage. Energies. 2023;16(20):7037. doi:10.3390/en16207037

BibTeX
@article{Liu2023,
  author = {Liu, Peng and Wang, Yajing and Liang, Zhao and Zhang, Zhikai and Rao, Jun and Jiang, Shuai},
  title = {Experimental Study on a Novel Form-Stable Phase Change Material Based on Solid Waste Iron Tailings as Supporting Material for Thermal Energy Storage},
  journal = {Energies},
  year = {2023},
  volume = {16},
  number = {20},
  pages = {7037},
  doi = {10.3390/en16207037}
}
Kostenlos starten →