EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

NURBS-Driven Modelling of Interface Geometric Errors in Aero-Engine Casings for Assembly Analysis

Xiaole Guan, Xin Jin, Zhijing Zhang

Modelling · 13.08.2026 · 7 (4) · 164

DOI: 10.3390/modelling7040164 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Modelling, online erschienen am 13.08.2026. Verfasst von Xiaole Guan und 2 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Assembly-oriented geometric models of aero-engine casings require the spatial distribution of deviations at mating interfaces. Conventional scalar descriptors, including flatness, axial runout, and radial runout, cannot retain this information. This study proposes a measurement-driven integrated modelling method based on measured point clouds. After boundary completion, gross-error removal, and Gaussian filtering, the interface morphology is reconstructed as a tensor-product cubic B-spline surface in unit-weight non-uniform rational B-spline (NURBS) form. The reconstructed surface is then integrated with the nominal computer-aided design (CAD) model. Validation was performed using two cuboidal specimens and three representative casing flange surfaces. The relative differences between the reconstructed and measured flatness values of the cuboidal specimens were −8.58% and −1.04%. At the withheld verification points of the casing flange surfaces, the mean absolute reconstruction errors were 0.0022 mm, 0.0017 mm, and 0.0049 mm. These results show that measured interface morphology can be transferred into a CAD-compatible component model while retaining its spatial characteristics. The present study provides a geometric basis for subsequent assembly analysis.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Guan, X., Jin, X., & Zhang, Z. (2026). NURBS-Driven Modelling of Interface Geometric Errors in Aero-Engine Casings for Assembly Analysis. Modelling, 7(4), 164. https://doi.org/10.3390/modelling7040164

Vancouver

Guan X, Jin X, Zhang Z. NURBS-Driven Modelling of Interface Geometric Errors in Aero-Engine Casings for Assembly Analysis. Modelling. 2026;7(4):164. doi:10.3390/modelling7040164

BibTeX
@article{Guan2026,
  author = {Guan, Xiaole and Jin, Xin and Zhang, Zhijing},
  title = {NURBS-Driven Modelling of Interface Geometric Errors in Aero-Engine Casings for Assembly Analysis},
  journal = {Modelling},
  year = {2026},
  volume = {7},
  number = {4},
  pages = {164},
  doi = {10.3390/modelling7040164}
}
Kostenlos starten →