A Method for Rapidly Predicting Force-Induced Deformation During the Peripheral Milling of Curved Thin-Walled Parts
Modelling · 01.07.2026 · 7 (4) · 133
DOI: 10.3390/modelling7040133 ↗Kurz gefasst
Fachartikel in der Zeitschrift Modelling, online erschienen am 01.07.2026. Verfasst von Fangqian Wu und 4 weiteren Autor:innen. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Liaoning Province, Fundamental Research Funds for the Provincial Universities of Liaoning.
Abstract (Originalsprache)
Due to the low stiffness characteristics, thin-walled parts are prone to force-induced deformation during the peripheral milling process, which severely restricts machining accuracy and efficiency. In existing studies, for curved thin-walled parts, the Finite Element Method (FEM) is usually adopted for deformation prediction. However, the traditional FEM usually requires a considerable amount of computing time, owing to the high model complexity and batch parameter evaluations. Therefore, this study proposes a method of constructing a surrogate model based on a small amount of FEM simulation data. Firstly, a peripheral milling cutting force model is established to obtain the instantaneous milling force. Secondly, a finite element model considering the material removal effect is constructed, and an iterative solution strategy is introduced to calculate the force-induced deformation. Finally, an Enhanced Latin Hypercube Sampling (ELHS) method is used to generate training samples, and the Elliptic Basis Function Neural Network (EBFNN) is selected as the surrogate model to establish a nonlinear mapping relationship between machining parameter combinations and force-induced deformation. This method enables rapid prediction of deformation at any machining position on curved thin-walled parts, reducing the computation time from hours to seconds while maintaining prediction accuracy.
Förderung
- Natural Science Foundation of Liaoning Province
- Fundamental Research Funds for the Provincial Universities of Liaoning
Zitieren
APA
Wu, F., Song, X., Yuan, L., Jiang, S., & Sun, Y. (2026). A Method for Rapidly Predicting Force-Induced Deformation During the Peripheral Milling of Curved Thin-Walled Parts. Modelling, 7(4), 133. https://doi.org/10.3390/modelling7040133
Vancouver
Wu F, Song X, Yuan L, Jiang S, Sun Y. A Method for Rapidly Predicting Force-Induced Deformation During the Peripheral Milling of Curved Thin-Walled Parts. Modelling. 2026;7(4):133. doi:10.3390/modelling7040133
BibTeX
@article{Wu2026,
author = {Wu, Fangqian and Song, Xueping and Yuan, Lin and Jiang, Shanglei and Sun, Yuwen},
title = {A Method for Rapidly Predicting Force-Induced Deformation During the Peripheral Milling of Curved Thin-Walled Parts},
journal = {Modelling},
year = {2026},
volume = {7},
number = {4},
pages = {133},
doi = {10.3390/modelling7040133}
}
EUVIMED