EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Non-Linear Control and Numerical Analysis Applied in a Non-Linear Model of Cutting Process Subject to Non-Ideal Excitations

Angelo M. Tusset, Jonierson A. Cruz, Jose M. Balthazar, Maria E. K. Fuziki, Giane G. Lenzi

Modelling · 05.12.2024 · 5 (4) · 1889-1904

DOI: 10.3390/modelling5040098 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Modelling, online erschienen am 05.12.2024. Verfasst von Angelo M. Tusset und 4 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work presents a non-linear mathematical model of a machining system subjected to a non-ideal vibration source. Computer simulations have shown chaotic behavior for specific parameters of the proposed mathematical model. The chaotic behavior is proven using time histories, phase diagrams, bifurcation diagrams, and the Lyapunov exponent. Considering that cutting tool vibration in the machining process is one of the main problems of productivity and machining accuracy, the introduction of a magnetorheological damper was considered in the proposed model to reduce the vibration amplitudes of the cutting tool and suppress the chaotic behavior. Hysteresis was considered in the magnetorheological damper model and its application in the system as both a passive and active absorber. The active control strategy considered the application of two non-linear control signals: feedforward to maintain the vibration with a desired behavior and state feedback to drive the system to the desired behavior. The numerical results demonstrated that the proposed controls efficiently reduced the vibration amplitude by introducing the MR damper. Active control has proven effective in controlling the force of the MR damper by varying the electrical voltage applied to the damper coil.

Zitieren

APA

Tusset, A. M., Cruz, J. A., Balthazar, J. M., Fuziki, M. E. K., & Lenzi, G. G. (2024). Non-Linear Control and Numerical Analysis Applied in a Non-Linear Model of Cutting Process Subject to Non-Ideal Excitations. Modelling, 5(4), 1889-1904. https://doi.org/10.3390/modelling5040098

Vancouver

Tusset AM, Cruz JA, Balthazar JM, Fuziki MEK, Lenzi GG. Non-Linear Control and Numerical Analysis Applied in a Non-Linear Model of Cutting Process Subject to Non-Ideal Excitations. Modelling. 2024;5(4):1889-1904. doi:10.3390/modelling5040098

BibTeX
@article{Tusset2024,
  author = {Tusset, Angelo M. and Cruz, Jonierson A. and Balthazar, Jose M. and Fuziki, Maria E. K. and Lenzi, Giane G.},
  title = {Non-Linear Control and Numerical Analysis Applied in a Non-Linear Model of Cutting Process Subject to Non-Ideal Excitations},
  journal = {Modelling},
  year = {2024},
  volume = {5},
  number = {4},
  pages = {1889--1904},
  doi = {10.3390/modelling5040098}
}
Kostenlos starten →