EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Experimental Stress Analysis of Mast–Counterweight Connection in a Modified Bucket-Wheel Excavator ERc 1400-30/7 Using Strain-Gauge Measurements

Angela Maria Andreica, Mădălin Andreica, Mădălina Dănilă

Mining · 2026-03-04 · 6 (1) · 20

DOI: 10.3390/mining6010020 ↗

At a glance

Journal article in Mining, published online on 2026-03-04. Written by Angela Maria Andreica and 2 co-authors. 21 references. The full text is freely available (open access, CC BY 4.0).

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Background

Bucket-wheel excavators are critical assets in surface mining operations, where structural modifications to increase productivity must be validated through rigorous stress analysis to ensure operational safety. Following modification of an ERc 1400-30/7 excavator’s bucket wheel from 18 to 20 buckets, increased operational loads necessitated experimental verification of structural integrity.

Methods

A custom 10-channel strain-gauge data acquisition system with 0–10 kHz bandwidth measured stresses in cable anchoring lugs and H-type diagonal members under operational conditions at the Jilț lignite mine, Romania. Measurements were performed during both left and right bucket-wheel rotation. Finite element analysis validated experimental results.

Results

Maximum equivalent stresses of 210.0 MPa and 167.1 MPa were measured in the left and right anchoring lugs, respectively, during left bucket-wheel rotation, representing 59% and 47% of material yield strength with safety factors of 1.69 and 2.12. Significant load asymmetry was observed, with left rotation inducing 220–284% higher stresses than right rotation. FEA validation showed

Cite

APA

Andreica, A. M., Andreica, M., & Dănilă, M. (2026). Experimental Stress Analysis of Mast–Counterweight Connection in a Modified Bucket-Wheel Excavator ERc 1400-30/7 Using Strain-Gauge Measurements. Mining, 6(1), 20. https://doi.org/10.3390/mining6010020

Vancouver

Andreica AM, Andreica M, Dănilă M. Experimental Stress Analysis of Mast–Counterweight Connection in a Modified Bucket-Wheel Excavator ERc 1400-30/7 Using Strain-Gauge Measurements. Mining. 2026;6(1):20. doi:10.3390/mining6010020

BibTeX
@article{Andreica2026,
  author = {Andreica, Angela Maria and Andreica, Mădălin and Dănilă, Mădălina},
  title = {Experimental Stress Analysis of Mast–Counterweight Connection in a Modified Bucket-Wheel Excavator ERc 1400-30/7 Using Strain-Gauge Measurements},
  journal = {Mining},
  year = {2026},
  volume = {6},
  number = {1},
  pages = {20},
  doi = {10.3390/mining6010020}
}
Start for free →