Experimental Stress Analysis of Mast–Counterweight Connection in a Modified Bucket-Wheel Excavator ERc 1400-30/7 Using Strain-Gauge Measurements
Mining · 04.03.2026 · 6 (1) · 20
DOI: 10.3390/mining6010020 ↗Kurz gefasst
Fachartikel in der Zeitschrift Mining, online erschienen am 04.03.2026. Verfasst von Angela Maria Andreica und 2 weiteren Autor:innen. Die Arbeit nennt 21 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Background
Bucket-wheel excavators are critical assets in surface mining operations, where structural modifications to increase productivity must be validated through rigorous stress analysis to ensure operational safety. Following modification of an ERc 1400-30/7 excavator’s bucket wheel from 18 to 20 buckets, increased operational loads necessitated experimental verification of structural integrity.
Methods
A custom 10-channel strain-gauge data acquisition system with 0–10 kHz bandwidth measured stresses in cable anchoring lugs and H-type diagonal members under operational conditions at the Jilț lignite mine, Romania. Measurements were performed during both left and right bucket-wheel rotation. Finite element analysis validated experimental results.
Results
Maximum equivalent stresses of 210.0 MPa and 167.1 MPa were measured in the left and right anchoring lugs, respectively, during left bucket-wheel rotation, representing 59% and 47% of material yield strength with safety factors of 1.69 and 2.12. Significant load asymmetry was observed, with left rotation inducing 220–284% higher stresses than right rotation. FEA validation showed
Zitieren
APA
Andreica, A. M., Andreica, M., & Dănilă, M. (2026). Experimental Stress Analysis of Mast–Counterweight Connection in a Modified Bucket-Wheel Excavator ERc 1400-30/7 Using Strain-Gauge Measurements. Mining, 6(1), 20. https://doi.org/10.3390/mining6010020
Vancouver
Andreica AM, Andreica M, Dănilă M. Experimental Stress Analysis of Mast–Counterweight Connection in a Modified Bucket-Wheel Excavator ERc 1400-30/7 Using Strain-Gauge Measurements. Mining. 2026;6(1):20. doi:10.3390/mining6010020
BibTeX
@article{Andreica2026,
author = {Andreica, Angela Maria and Andreica, Mădălin and Dănilă, Mădălina},
title = {Experimental Stress Analysis of Mast–Counterweight Connection in a Modified Bucket-Wheel Excavator ERc 1400-30/7 Using Strain-Gauge Measurements},
journal = {Mining},
year = {2026},
volume = {6},
number = {1},
pages = {20},
doi = {10.3390/mining6010020}
}
EUVIMED