Integrated Hydrometallurgical Recovery of Vanadium from Spent Petrochemical Catalysts for the Production of High-Purity Ammonium Metavanadate
Minerals · 13.08.2026 · 16 (8) · 835
DOI: 10.3390/min16080835 ↗Kurz gefasst
Fachartikel in der Zeitschrift Minerals, online erschienen am 13.08.2026. Verfasst von Nazigul Zhumakynbai und 3 weiteren Autor:innen. Die Arbeit nennt 18 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan.
Abstract (Originalsprache)
An integrated hydrometallurgical process for the recovery of vanadium from spent petrochemical catalysts and the production of high-purity ammonium metavanadate (AMV) was developed and experimentally validated. Alkaline leaching of roasted vanadium-bearing catalysts resulted in vanadium extraction of 90%–95%, producing a solution containing 37.0 g/L V2O5 together with phosphorus, sulfur, silicon, and molybdenum impurities. Two purification approaches, ion-exchange sorption and magnesium oxide treatment, were evaluated for impurity removal. Sorption using the macro porous anion-exchange resin Biolite 200U provided effective silicon removal but resulted in significant vanadium losses (up to 19.6%) due to co-sorption of vanadium and phosphorus. In contrast, magnesium oxide treatment at 70–80 °C reduced the phosphorus concentration from 0.39 to 0.04 g/L (approximately 90% removal) and completely removed silicon while limiting vanadium losses to less than 2.5%. Following purification, ammonium metavanadate was precipitated using ammonium chloride at a V2O5:NH4Cl molar ratio of 1:2 and pH 8.8–9.0, achieving approximately 99% vanadium recovery. X-ray diffraction analysis confirmed the formation of single-phase NH4VO3 after solution purification, whereas precipitation from untreated solutions resulted in contamination by alumina-bearing phases. The proposed process provides an effective route for producing purified ammonium metavanadate suitable for subsequent conversion into metallurgical-grade V2O5. The ultimate goal of the proposed technology is the production of metallurgical-grade ferrovanadium (FeV80). Because AMV is thermally converted to V2O5 with a weight loss of approximately 24%–25%, phosphorus and sulfur concentrations in AMV must be maintained below approximately 0.04 wt.% to ensure compliance with the impurity requirements of FeV80 according to GOST 27130-94.
Förderung
- Committee of Science of the Ministry of Science and Higher Education of the Republic of Kazakhstan
Zitieren
APA
Zhumakynbai, N., Berdikulova, F. A., Ondiris, B. G., & Sapargaliyeva, G. S. (2026). Integrated Hydrometallurgical Recovery of Vanadium from Spent Petrochemical Catalysts for the Production of High-Purity Ammonium Metavanadate. Minerals, 16(8), 835. https://doi.org/10.3390/min16080835
Vancouver
Zhumakynbai N, Berdikulova FA, Ondiris BG, Sapargaliyeva GS. Integrated Hydrometallurgical Recovery of Vanadium from Spent Petrochemical Catalysts for the Production of High-Purity Ammonium Metavanadate. Minerals. 2026;16(8):835. doi:10.3390/min16080835
BibTeX
@article{Zhumakynbai2026,
author = {Zhumakynbai, Nazigul and Berdikulova, Feruza A. and Ondiris, Bagzhan G. and Sapargaliyeva, Gauhar S.},
title = {Integrated Hydrometallurgical Recovery of Vanadium from Spent Petrochemical Catalysts for the Production of High-Purity Ammonium Metavanadate},
journal = {Minerals},
year = {2026},
volume = {16},
number = {8},
pages = {835},
doi = {10.3390/min16080835}
}
EUVIMED