EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Integrated Hydrometallurgical–Electrodialysis Process for High-Purity Lithium Carbonate Recovery from Battery Waste

Jose Luis Aldana, Lourdes Yurramendi, Javier Antoñanzas, Javier Nieto, Carmen del Río

Batteries · 05.03.2026 · 12 (3) · 89

DOI: 10.3390/batteries12030089 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Batteries, online erschienen am 05.03.2026. Verfasst von Jose Luis Aldana und 4 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 59 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union’s Horizon Europe research and innovation programme.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The rapid increase in end-of-life lithium-ion batteries demands sustainable recycling routes for lithium recovery. This work presents a novel integrated hydrometallurgical–electrodialysis process designed specifically for recovering lithium from off-specification NMC cathode materials while enabling full reagent recyclability. Selective leaching with oxalic acid was optimised by setting the water-to-oxalic acid dihydrate ratio (H2O/OA·2H2O) to 7.3:1 w/w, achieving 81% lithium extraction at room temperature within 2 h while limiting the co-dissolution of Ni, Co and Mn to 0.2%, 1.6% and 1.7% by weight, respectively. The resulting leachate was processed in a four-chamber electrodialysis cell equipped with two Nafion 117 cation-exchange membranes and one Neosepta AMX-fmg anion-exchange membrane operating at −1.6 V versus Ag/AgCl, enabling 96% lithium recovery and 98% oxalic acid recovery. The regenerated oxalic acid stream (41.8 g L−1) was fully restored to its initial concentration and reused in successive cycles without performance loss. Subsequent precipitation of lithium with Na2CO3 yielded 99.3%-pure Li2CO3. This combined leaching–electrodialysis–precipitation presents a high selectivity, low-waste, circular recovery system, offering a scientifically original approach that integrates reagent regeneration with high-purity lithium production.

Förderung

  • European Union’s Horizon Europe research and innovation programme

Zitieren

APA

Aldana, J. L., Yurramendi, L., Antoñanzas, J., Nieto, J., & Río, C. D. (2026). An Integrated Hydrometallurgical–Electrodialysis Process for High-Purity Lithium Carbonate Recovery from Battery Waste. Batteries, 12(3), 89. https://doi.org/10.3390/batteries12030089

Vancouver

Aldana JL, Yurramendi L, Antoñanzas J, Nieto J, Río CD. An Integrated Hydrometallurgical–Electrodialysis Process for High-Purity Lithium Carbonate Recovery from Battery Waste. Batteries. 2026;12(3):89. doi:10.3390/batteries12030089

BibTeX
@article{Aldana2026,
  author = {Aldana, Jose Luis and Yurramendi, Lourdes and Antoñanzas, Javier and Nieto, Javier and Río, Carmen del},
  title = {An Integrated Hydrometallurgical–Electrodialysis Process for High-Purity Lithium Carbonate Recovery from Battery Waste},
  journal = {Batteries},
  year = {2026},
  volume = {12},
  number = {3},
  pages = {89},
  doi = {10.3390/batteries12030089}
}
Kostenlos starten →