EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Effect of Ore Pre-Heating on the Operation of a 300 kVA Submerged Arc Furnace for High Carbon Ferromanganese Alloy Production—Pilot Study Results

Matale Samuel Moholwa, Sello Peter Tsebe, Derek Hayman, Sanda Moloane, Joalet Steenkamp, Martin Sitefane, Driaan Bezuidenhout

Minerals · 13.09.2025 · 15 (9) · 968

DOI: 10.3390/min15090968 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Minerals, online erschienen am 13.09.2025. Verfasst von Matale Samuel Moholwa und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 17 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union’s Horizon 2020 PREMA project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effect of ore pre-heating on the operation of a 300 kVA Submerged Arc Furnace (SAF) for high carbon ferromanganese (HCFeMn) alloy was investigated. The two types of Mn ores from the Kalahari Manganese Field (KMF) were used in the investigation (Ore #1 and Ore #2). Quartz and coke sourced from South Africa were used as a fluxing agent and a reductant, respectively. The Mn ores, reductant and fluxing agent were delivered to Mintek with a size range of +6–20 mm and were sent to our in-house laboratories to determine the chemical and physical properties. The samples were taken for Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES), combustion method (LECO), proximate analysis and quantitative X-ray diffraction (QXRD). A newly designed and constructed pilot facility at Mintek was used in the investigation. The facility included a 1 t/h rotary kiln coupled to an electric arc furnace supplied with an alternating current (AC) with a 300 kVA tap-changer transformer. The main aim of the investigation was to demonstrate the effect of ore pre-heating to 600 °C on the furnace energy consumption and CO/CO2 emissions. The experimental approach adopted involved feeding Mn ore to establish baseline operating conditions, followed by feeding of Mn ore pre-heated with a rotary kiln to compare operational parameters. The pilot campaign experienced several operational challenges but there were periods of stable operation that enabled data collection for furnace energy consumption and CO/CO2 emissions. The effect of pre-heating the ore to 600 °C on the SAF energy consumption and CO/CO2 emissions was demonstrated successfully and revealed that energy savings and reduction in furnace CO2 emissions is achievable. Pre-heating Mn ore to 600 °C lowered the furnace energy consumption by an average of 22.5% and CO2 emissions by an average of 37%. The campaign also achieved an overall manganese recovery of 86%. Operating the furnace with hot feed increased the heat losses through the roof by 300% compared to heat losses observed during cold feed. There were also no significant changes in the furnace electrical parameters observed between the two feed modes.

Förderung

  • European Union’s Horizon 2020 PREMA project

Zitieren

APA

Moholwa, M. S., Tsebe, S. P., Hayman, D., Moloane, S., Steenkamp, J., Sitefane, M., & Bezuidenhout, D. (2025). The Effect of Ore Pre-Heating on the Operation of a 300 kVA Submerged Arc Furnace for High Carbon Ferromanganese Alloy Production—Pilot Study Results. Minerals, 15(9), 968. https://doi.org/10.3390/min15090968

Vancouver

Moholwa MS, Tsebe SP, Hayman D, Moloane S, Steenkamp J, Sitefane M, et al. The Effect of Ore Pre-Heating on the Operation of a 300 kVA Submerged Arc Furnace for High Carbon Ferromanganese Alloy Production—Pilot Study Results. Minerals. 2025;15(9):968. doi:10.3390/min15090968

BibTeX
@article{Moholwa2025,
  author = {Moholwa, Matale Samuel and Tsebe, Sello Peter and Hayman, Derek and Moloane, Sanda and Steenkamp, Joalet and Sitefane, Martin and Bezuidenhout, Driaan},
  title = {The Effect of Ore Pre-Heating on the Operation of a 300 kVA Submerged Arc Furnace for High Carbon Ferromanganese Alloy Production—Pilot Study Results},
  journal = {Minerals},
  year = {2025},
  volume = {15},
  number = {9},
  pages = {968},
  doi = {10.3390/min15090968}
}
Kostenlos starten →