The Influence of Conical Pick Cutter Wear Conditions on Physical Characteristics and Particle Size Distribution of Coal: Health and Safety Considerations with a Focus on Silica
Minerals · 16.02.2025 · 15 (2) · 182
DOI: 10.3390/min15020182 ↗Kurz gefasst
Fachartikel in der Zeitschrift Minerals, online erschienen am 16.02.2025. Verfasst von Manso Sesay und 5 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Institute for Occupational Safety and Health (NIOSH) and the Centers for Disease Control and Prevention (CDC).
Abstract (Originalsprache)
This study investigates the correlations between the wear conditions of conical pick cutters and key variables such as the physical properties (shape, aspect ratio, roughness), explosive potential, health and safety implications, and particle size distribution of coal dust and larger fragments using the linear cutting machine (LCM). This research was conducted within the framework of recent regulatory developments, notably implementing the new silica rule in the mining and construction sectors and climate change consideration. This study reveals critical insights into optimizing operational processes while adhering to stringent health and safety regulations. The findings indicate that as cutting tools wear, there is a significant increase in generated fine particles, including respirable crystalline silica (RCS), which elevates the risk of respiratory diseases and, in the case of coal dust, a higher potential for explosions. The results show that the silica content in respirable dust is a function of rock mineralogy; however, the results showed that the absolute amount of silica-containing dust increased with bit wear in rocks containing pertinent minerals. For the larger fragments, the new bit produced a 1699 fragment count, while the completely worn-out bit produced a 5608 count. The results of the dust concentration show that the new bit produces 89.2 mg/m3 (17.84%); the moderate bit produces 165.1 mg/m3 (33.03%), and the worn-out bit produces 245.6 mg/m3 (49.13%). Moreover, this study highlights the impact of bit wear on the production of larger fragments, which decreases with tool degradation, further contributing to dust generation. These results suggest the necessity for proactive equipment maintenance, enhanced dust control measures, and continuous monitoring of cutting tool wear to ensure compliance with regulatory standards and to protect workers’ health and safety.
Förderung
- National Institute for Occupational Safety and Health (NIOSH) and the Centers for Disease Control and Prevention (CDC)
Zitieren
APA
Sesay, M., Rostami, J., Slouka, S., Miller, H., Kaunda, R., & Mohanty, A. (2025). The Influence of Conical Pick Cutter Wear Conditions on Physical Characteristics and Particle Size Distribution of Coal: Health and Safety Considerations with a Focus on Silica. Minerals, 15(2), 182. https://doi.org/10.3390/min15020182
Vancouver
Sesay M, Rostami J, Slouka S, Miller H, Kaunda R, Mohanty A. The Influence of Conical Pick Cutter Wear Conditions on Physical Characteristics and Particle Size Distribution of Coal: Health and Safety Considerations with a Focus on Silica. Minerals. 2025;15(2):182. doi:10.3390/min15020182
BibTeX
@article{Sesay2025,
author = {Sesay, Manso and Rostami, Jamal and Slouka, Syd and Miller, Hugh and Kaunda, Rennie and Mohanty, Anshuman},
title = {The Influence of Conical Pick Cutter Wear Conditions on Physical Characteristics and Particle Size Distribution of Coal: Health and Safety Considerations with a Focus on Silica},
journal = {Minerals},
year = {2025},
volume = {15},
number = {2},
pages = {182},
doi = {10.3390/min15020182}
}
EUVIMED