EUVIMEDEUVIMED entdecken
Crossref

Wear load analysis of conical cutter crushing rock based on SPH to SPH interaction method

Xiaohui Liu, Junwei Zhai, Lei Guo, Leilei Cao, Penghui Wang

Eksploatacja i Niezawodność – Maintenance and Reliability · 07.10.2024 · 27 (1)

DOI: 10.17531/ein/193899 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Eksploatacja i Niezawodność – Maintenance and Reliability, online erschienen am 07.10.2024. Verfasst von Xiaohui Liu und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Wear is the main failure type for conical cutters. The main load causing its wear is difficult to measure in the test, and the existing simulation models cannot simulate the wear load. Thus, the three-dimensional dynamic model for conical cutter crushing rock is established based on the SPH-SPH interaction method to analyze the relationship between the cutting performance factors and cutter wear. The factors are taken into account such as the stress distribution of rock, kinetic energy and internal energy and displacement of rock, cutting load of cutter, stress of cutter. Then, it is studied that the effect of cutting angle on the cutting performance parameters such as specific energy consumption, rock avalanching, cutting load, load fluctuation, cutter tip stress and cutter side stress. Finally, the cutting angle selection reference of the cutter is given under different consideration factors.

Zitieren

APA

Liu, X., Zhai, J., Guo, L., Cao, L., & Wang, P. (2024). Wear load analysis of conical cutter crushing rock based on SPH to SPH interaction method. Eksploatacja i Niezawodność – Maintenance and Reliability, 27(1). https://doi.org/10.17531/ein/193899

Vancouver

Liu X, Zhai J, Guo L, Cao L, Wang P. Wear load analysis of conical cutter crushing rock based on SPH to SPH interaction method. Eksploatacja i Niezawodność – Maintenance and Reliability. 2024;27(1). doi:10.17531/ein/193899

BibTeX
@article{Liu2024,
  author = {Liu, Xiaohui and Zhai, Junwei and Guo, Lei and Cao, Leilei and Wang, Penghui},
  title = {Wear load analysis of conical cutter crushing rock based on SPH to SPH interaction method},
  journal = {Eksploatacja i Niezawodność – Maintenance and Reliability},
  year = {2024},
  volume = {27},
  number = {1},
  doi = {10.17531/ein/193899}
}
Kostenlos starten →