EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Enhancing Iron Ore Grindability through Hybrid Thermal-Mechanical Pretreatment

Sefiu O. Adewuyi, Hussin A. M. Ahmed, Angelina Anani, Abdu Saeed, Haitham M. Ahmed, Reem Alwafi, Kray Luxbacher

Minerals · 2024-10-14 · 14 (10) · 1027

DOI: 10.3390/min14101027 ↗

At a glance

Journal article in Minerals, published online on 2024-10-14. Written by Sefiu O. Adewuyi and 6 co-authors. Cited 6 times so far (Crossref); 40 references. The full text is freely available (open access, CC BY 4.0). Funded by: Deanship of Scientific Research (DSR), King Abdulaziz University, Jeddah.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

Grinding is an important process of ore beneficiation that consumes a significant amount of energy. Pretreating ore before grinding has been proposed to improve ore grindability, reduce comminution energy, and enhance downstream operations. This paper investigates hybrid thermal mechanical pretreatment to improve iron ore grinding behavior. Thermal pretreatment was performed using conventional and microwave approaches, while mechanical pretreatment was conducted with a pressure device using a piston die. Results indicate that conventional (heating rate: 10 °C; maximum temperature: 400 °C), microwave (2.45 GHz, 1.7 kW, 60 s), and mechanical (14.86 MPa, zero delay time) pretreatments improved the studied iron ore grindability by 4.6, 19.8, and 15.4%, respectively. Meanwhile, conventional-mechanical and microwave-mechanical pretreatments enhanced the studied iron ore grindability by 19.2% and 22.6%, respectively. These results suggest that stand-alone mechanical pretreatment or microwave pretreatment may be more beneficial in improving the grinding behavior of the studied fine-grain iron ore sample. The results of the mechanical pretreatment obtained in this study may be used in a simulation of the HPGR system for grinding operations of similar iron ore

Funding

  • Deanship of Scientific Research (DSR), King Abdulaziz University, Jeddah

Cite

APA

Adewuyi, S. O., Ahmed, H. A. M., Anani, A., Saeed, A., Ahmed, H. M., Alwafi, R., & Luxbacher, K. (2024). Enhancing Iron Ore Grindability through Hybrid Thermal-Mechanical Pretreatment. Minerals, 14(10), 1027. https://doi.org/10.3390/min14101027

Vancouver

Adewuyi SO, Ahmed HAM, Anani A, Saeed A, Ahmed HM, Alwafi R, et al. Enhancing Iron Ore Grindability through Hybrid Thermal-Mechanical Pretreatment. Minerals. 2024;14(10):1027. doi:10.3390/min14101027

BibTeX
@article{Adewuyi2024,
  author = {Adewuyi, Sefiu O. and Ahmed, Hussin A. M. and Anani, Angelina and Saeed, Abdu and Ahmed, Haitham M. and Alwafi, Reem and Luxbacher, Kray},
  title = {Enhancing Iron Ore Grindability through Hybrid Thermal-Mechanical Pretreatment},
  journal = {Minerals},
  year = {2024},
  volume = {14},
  number = {10},
  pages = {1027},
  doi = {10.3390/min14101027}
}
Start for free →