EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing Iron Ore Grindability through Hybrid Thermal-Mechanical Pretreatment

Sefiu O. Adewuyi, Hussin A. M. Ahmed, Angelina Anani, Abdu Saeed, Haitham M. Ahmed, Reem Alwafi, Kray Luxbacher

Minerals · 14.10.2024 · 14 (10) · 1027

DOI: 10.3390/min14101027 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Minerals, online erschienen am 14.10.2024. Verfasst von Sefiu O. Adewuyi und 6 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deanship of Scientific Research (DSR), King Abdulaziz University, Jeddah.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Grinding is an important process of ore beneficiation that consumes a significant amount of energy. Pretreating ore before grinding has been proposed to improve ore grindability, reduce comminution energy, and enhance downstream operations. This paper investigates hybrid thermal mechanical pretreatment to improve iron ore grinding behavior. Thermal pretreatment was performed using conventional and microwave approaches, while mechanical pretreatment was conducted with a pressure device using a piston die. Results indicate that conventional (heating rate: 10 °C; maximum temperature: 400 °C), microwave (2.45 GHz, 1.7 kW, 60 s), and mechanical (14.86 MPa, zero delay time) pretreatments improved the studied iron ore grindability by 4.6, 19.8, and 15.4%, respectively. Meanwhile, conventional-mechanical and microwave-mechanical pretreatments enhanced the studied iron ore grindability by 19.2% and 22.6%, respectively. These results suggest that stand-alone mechanical pretreatment or microwave pretreatment may be more beneficial in improving the grinding behavior of the studied fine-grain iron ore sample. The results of the mechanical pretreatment obtained in this study may be used in a simulation of the HPGR system for grinding operations of similar iron ore

Förderung

  • Deanship of Scientific Research (DSR), King Abdulaziz University, Jeddah

Zitieren

APA

Adewuyi, S. O., Ahmed, H. A. M., Anani, A., Saeed, A., Ahmed, H. M., Alwafi, R., & Luxbacher, K. (2024). Enhancing Iron Ore Grindability through Hybrid Thermal-Mechanical Pretreatment. Minerals, 14(10), 1027. https://doi.org/10.3390/min14101027

Vancouver

Adewuyi SO, Ahmed HAM, Anani A, Saeed A, Ahmed HM, Alwafi R, et al. Enhancing Iron Ore Grindability through Hybrid Thermal-Mechanical Pretreatment. Minerals. 2024;14(10):1027. doi:10.3390/min14101027

BibTeX
@article{Adewuyi2024,
  author = {Adewuyi, Sefiu O. and Ahmed, Hussin A. M. and Anani, Angelina and Saeed, Abdu and Ahmed, Haitham M. and Alwafi, Reem and Luxbacher, Kray},
  title = {Enhancing Iron Ore Grindability through Hybrid Thermal-Mechanical Pretreatment},
  journal = {Minerals},
  year = {2024},
  volume = {14},
  number = {10},
  pages = {1027},
  doi = {10.3390/min14101027}
}
Kostenlos starten →