EUVIMEDOpdag EUVIMED
Open access · CC BY 4.0

Blazed Diffraction Grating Made by Greyscale Lithography Using a Laser Writer

Hung Hoang, Frederic Zamkotsian, Patrick Pittet, Clémentine Symonds, Lionel Simonot, Celine Chevalier, Alban Gassenq

Micromachines · 2026-10-28 · 17 (11) · 1237

DOI: 10.3390/mi17111237 ↗

At a glance

Journal article in Micromachines, published online on 2026-10-28. Written by Hung Hoang and 6 co-authors. 20 references. The full text is freely available (open access, CC BY 4.0). Funded by: NanoLyon platforms, LAM UMR 7326.

AbstractBibliografiske oplysningerCiteRelated studies

Abstract (original language)

This study demonstrates a single-step fabrication of blazed gratings on silicon substrates using direct laser greyscale lithography and aluminum coating. Three key parameters were studied for process optimization, i.e., the exposure dose of the photoresist, the focusing method, and the laser scan writing mode. We have shown that a bijective correspondence between dose and thickness ranging from 0 to 127 mJ/cm2, defined across 100 levels, enabled us to obtain a linear photoresist thickness profile. The stitching artifacts were then eliminated using fine optical autofocus with overlap writing mode. Finally, the optimized grating (3.3 µm period, 12° blaze angle, 0.52 µm depth) exhibits a well-defined saw tooth profile, confirmed by atomic force and scanning electron microscopies. Optical characterization using Fourier-plane imaging shows a dominant −1st diffraction order, confirming successful blaze behavior, especially for 700 nm wavelength. This work establishes direct laser greyscale lithography as a viable, cost-effective, and fast method for fabricating high-quality blazed gratings.

Funding

  • NanoLyon platforms
  • LAM UMR 7326

Cite

APA

Hoang, H., Zamkotsian, F., Pittet, P., Symonds, C., Simonot, L., Chevalier, C., & Gassenq, A. (2026). Blazed Diffraction Grating Made by Greyscale Lithography Using a Laser Writer. Micromachines, 17(11), 1237. https://doi.org/10.3390/mi17111237

Vancouver

Hoang H, Zamkotsian F, Pittet P, Symonds C, Simonot L, Chevalier C, et al. Blazed Diffraction Grating Made by Greyscale Lithography Using a Laser Writer. Micromachines. 2026;17(11):1237. doi:10.3390/mi17111237

BibTeX
@article{Hoang2026,
  author = {Hoang, Hung and Zamkotsian, Frederic and Pittet, Patrick and Symonds, Clémentine and Simonot, Lionel and Chevalier, Celine and Gassenq, Alban},
  title = {Blazed Diffraction Grating Made by Greyscale Lithography Using a Laser Writer},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {11},
  pages = {1237},
  doi = {10.3390/mi17111237}
}
Start for free →