EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Device-Level Modeling, Cross-Axis Analysis, and Optical Characterization of a Symmetric Triple-Layer MOEMS Accelerometer

Pengfei Li, Shuang Wu, Wenhui Yan, Yujie Xiong, Jiaxin Sun, Chaoyue Shi, Haiyan Wang, Xiaoxu Wang, Qianbo Lu

Micromachines · 20.08.2026 · 17 (8) · 984

DOI: 10.3390/mi17080984 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 20.08.2026. Verfasst von Pengfei Li und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Marine Science and Technology, Northwestern Polytechnical University, 127 West Youyi Road, Xi'an 710072, China. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Zhejiang Provincial, Natural Science Foundation of Ningbo.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Enhancing the proof mass without enlarging the chip area or introducing structural asymmetry is a central challenge in the development of low-noise microelectromechanical system (MEMS) accelerometers. Here, we present a symmetric triple-layer MOEMS accelerometer and analyze its device-level sensitivity trade-off, cross-axis coupling behavior, and dynamic consistency between measurement and finite-element simulations. The proposed sensing element sandwiches one without-beam mass layer between two identical with-beam layers, thereby increasing the effective proof mass while preserving mirror symmetry. A lumped-parameter model is developed to explain the sensitivity trade-off among single-layer, asymmetric double-layer, and symmetric triple-layer configurations. Finite-element simulations are used to distinguish translational cross-axis coupling from rotational cross-axis coupling. The experimental characterization of one packaged triple-layer prototype demonstrates a mechanical sensitivity of 193.91 µm/(m/s2), a 10 min output RMS fluctuation of 1.81 µg, and a measured first-order resonant frequency of 11.23 Hz, in close agreement with the tolerance-included finite-element prediction of 11.40 Hz. The resonance bandwidth further yields an apparent package-level quality factor of approximately 374 under ambient pressure, providing additional characterization of the packaged device dynamics.

Schlagwörter

Stichwörter der Autor:innen

MEMS inertial sensorMOEMS accelerometeracceleration noisecross-axis couplingoptical readoutproof-mass enhancementwafer-level stacking

Autor:innen und Institutionen

  • School of Marine Science and Technology, Northwestern Polytechnical University, 127 West Youyi Road, Xi'an 710072, China.
  • School of Automation, Northwestern Polytechnical University, 127 West Youyi Road, Xi'an 710072, China.
  • State Key Laboratory of Flexible Electronics (LOFE), Institute of Flexible Electronics (IFE), Northwestern Polytechnical University, 127 West Youyi Road, Xi'an 710072, China.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Zhejiang Provincial
  • Natural Science Foundation of Ningbo
  • Key Research and Development Program of Shaanxi Province
  • Aeronautical Science Foundation of China
  • National Postdoctoral Program for Innovative Talents
  • Natural Science Foundation of Zhejiang Province

Zitieren

APA

Li, P., Wu, S., Yan, W., Xiong, Y., Sun, J., Shi, C., Wang, H., Wang, X., & Lu, Q. (2026). Device-Level Modeling, Cross-Axis Analysis, and Optical Characterization of a Symmetric Triple-Layer MOEMS Accelerometer. Micromachines, 17(8), 984. https://doi.org/10.3390/mi17080984

Vancouver

Li P, Wu S, Yan W, Xiong Y, Sun J, Shi C, et al. Device-Level Modeling, Cross-Axis Analysis, and Optical Characterization of a Symmetric Triple-Layer MOEMS Accelerometer. Micromachines. 2026;17(8):984. doi:10.3390/mi17080984

BibTeX
@article{Li2026,
  author = {Li, Pengfei and Wu, Shuang and Yan, Wenhui and Xiong, Yujie and Sun, Jiaxin and Shi, Chaoyue and Wang, Haiyan and Wang, Xiaoxu and Lu, Qianbo},
  title = {Device-Level Modeling, Cross-Axis Analysis, and Optical Characterization of a Symmetric Triple-Layer MOEMS Accelerometer},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {8},
  pages = {984},
  doi = {10.3390/mi17080984}
}
Kostenlos starten →