EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Additive Manufacturing of Polyamide-6 Preforms for Scalable Thermal Drawing of Structured Fibers

Akila Bandara iD, Ahmed Moustafa Abd-El Nabi iD, Luka Morita, Dan Sameoto iD

Micromachines · 19.08.2026 · 17 (8) · 978

DOI: 10.3390/mi17080978 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 19.08.2026. Verfasst von Akila Bandara und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, University of Alberta, Edmonton, AB T6G 2R3, Canada. Die Arbeit nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada, Government of Canada’s New Frontiers in Research Fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Thermal drawing is a prominent, scalable method for transforming preforms with complex macroscopic morphologies into multifunctional microscopic fibers. With the intent to develop fibers with complex cross-sections for potential integration in soft robotics, smart textile and fabric applications, we explore the potential of polyamide-6 (PA6) as a base material for thermal drawing. By implementing Fused Deposition Modeling (FDM), we additively manufactured PA6 preforms with solid circular and three-channel cross-sectional architectures. These preforms were then utilized in a series of thermal drawing experiments to identify the best-performing printing layer thickness and channel aspect ratio (AR) that consistently yielded scalable, microscopic fiber diameters over extended durations. Our results demonstrate that a printing layer thickness of 0.3 mm yielded the most consistent drawn fiber diameters for extended durations among the tested values. Additionally, AR experiments indicate that the intermediate ARs of 0.4 and 0.5 between the inner channel diameter and the outer diameter produce the most promising results within the investigated range, based on dimensional trends and qualitative observations of internal channel integrity.

Schlagwörter

Stichwörter der Autor:innen

3D printingFDMFused Deposition ModelingPA6additive manufacturingpolyamide-6smart fabricssmart fiberssmart textilessoft roboticsthermal drawing

Autor:innen und Institutionen

  • Department of Mechanical Engineering, University of Alberta, Edmonton, AB T6G 2R3, Canada.

ORCID-Profile: Akila Bandara, Ahmed Moustafa Abd-El Nabi, Dan Sameoto

Förderung

  • Natural Sciences and Engineering Research Council of Canada
  • Government of Canada’s New Frontiers in Research Fund

Zitieren

APA

Bandara, A., Nabi, A. M. A., Morita, L., & Sameoto, D. (2026). Additive Manufacturing of Polyamide-6 Preforms for Scalable Thermal Drawing of Structured Fibers. Micromachines, 17(8), 978. https://doi.org/10.3390/mi17080978

Vancouver

Bandara A, Nabi AMA, Morita L, Sameoto D. Additive Manufacturing of Polyamide-6 Preforms for Scalable Thermal Drawing of Structured Fibers. Micromachines. 2026;17(8):978. doi:10.3390/mi17080978

BibTeX
@article{Bandara2026,
  author = {Bandara, Akila and Nabi, Ahmed Moustafa Abd-El and Morita, Luka and Sameoto, Dan},
  title = {Additive Manufacturing of Polyamide-6 Preforms for Scalable Thermal Drawing of Structured Fibers},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {8},
  pages = {978},
  doi = {10.3390/mi17080978}
}
Kostenlos starten →