EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Direct-joining of short carbon fiber-reinforced polyamide 6 composite with wood by additive manufacturing

Gean Henrique Marcatto de Oliveira, Awais Awan, Peter Auer, Pia-Maria Egger, Leonardo Bresciani Canto, Josef Domitner, Sergio de Traglia Amancio-Filho

Progress in Additive Manufacturing · 2026-05 · 11 (5) · 4917-4931

DOI: 10.1007/s40964-026-01632-9 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Progress in Additive Manufacturing, online erschienen am 26.03.2026. Verfasst von Gean Henrique Marcatto de Oliveira und 6 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Graz University of Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The growing demand for sustainable lightweight materials in the transportation sector has intensified the search for new hybrid structures. This study investigates the joining of short carbon fiber-reinforced polyamide 6 composite (PA6-15CF) to European beech wood using an innovative additive manufacturing technique based on fused filament fabrication (FFF), known as AddJoining. Single-lap hybrid joints were fabricated by directly printing the polymer composite onto the natural wood substrate, achieving an ultimate lap-shear strength (ULSS) of 7.5 ± 1.2 MPa. Micromechanical interlocking and interfacial adhesion contributed to the robustness of the polymer-wood interface, as confirmed by microstructural analysis (OM and SEM) and FTIR spectroscopy, respectively. Fractographic analysis revealed a combination of adhesive and cohesive failure modes, with wood fibers embedded within the polymer matrix, indicating good interfacial compatibility. Furthermore, the joints exhibited remarkable mechanical durability under fatigue testing, achieving a fatigue life of 35% of the ultimate lap-shear force (ULSF) for 10 6 cycles, as estimated by the Weibull distribution with a reliability of 99%. The results demonstrate that AddJoining is a promising manufacturing strategy for producing lightweight, polymer-wood hybrid joints with potential application in sustainable structural design. Graphical abstract

Förderung

  • Graz University of Technology

Zitieren

APA

Oliveira, G. H. M. D., Awan, A., Auer, P., Egger, P., Canto, L. B., Domitner, J., & Amancio-Filho, S. D. T. (2026). Direct-joining of short carbon fiber-reinforced polyamide 6 composite with wood by additive manufacturing. Progress in Additive Manufacturing, 11(5), 4917-4931. https://doi.org/10.1007/s40964-026-01632-9

Vancouver

Oliveira GHMD, Awan A, Auer P, Egger P, Canto LB, Domitner J, et al. Direct-joining of short carbon fiber-reinforced polyamide 6 composite with wood by additive manufacturing. Progress in Additive Manufacturing. 2026;11(5):4917-4931. doi:10.1007/s40964-026-01632-9

BibTeX
@article{Oliveira2026,
  author = {Oliveira, Gean Henrique Marcatto de and Awan, Awais and Auer, Peter and Egger, Pia-Maria and Canto, Leonardo Bresciani and Domitner, Josef and Amancio-Filho, Sergio de Traglia},
  title = {Direct-joining of short carbon fiber-reinforced polyamide 6 composite with wood by additive manufacturing},
  journal = {Progress in Additive Manufacturing},
  year = {2026},
  volume = {11},
  number = {5},
  pages = {4917--4931},
  doi = {10.1007/s40964-026-01632-9}
}
Kostenlos starten →