EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study of the Orbital Circular Cutting in Quartz Wafers Using Electrochemical Discharge Machining with Micro-Electrodes

A-Cheng Wang, Jung-Chou Hung iD, Yu-Lun Tsai, Hai-Ping Tsui iD

Micromachines · 12.07.2026 · 17 (7) · 832

DOI: 10.3390/mi17070832 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 12.07.2026. Verfasst von A-Cheng Wang und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Chung Yuan Christian University, Taoyuan City 320314, Taiwan. Die Arbeit nennt 19 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Quartz wafer dicing technologies primarily rely on mechanical cutting and etching processes. Mechanical cutting is easy to generate the micro-cracks along the wafer edges, which compromises component precision. Furthermore, etching processes are associated with long processing times, high manufacturing costs, and environmental concerns. To address these limitations, this study proposes an electrochemical discharge cutting machining (ECDCM) method using a micro-tungsten carbide helical electrode performing orbital circular cutting (OCC) to evaluate the feasibility and optimization of quartz wafer dicing. Experimental studies were conducted to evaluate the effects of applied voltage, pulse duration, Z-axis feed rate, and duty factor on slot width, slot depth, slot surface quality and tool electrode wear. The results demonstrate that employing an OCC of micro-electrode facilitates the efficient flow of electrolyte into the machining zone, thereby enhancing discharge stability and slot quality. Compared to circular path cutting (CPC) with a rotating electrode, the proposed method reduces machining time by nearly four times and decreases material loss during circular quartz wafer cutting by approximately 50%. These findings indicate that the proposed machining approach provides high efficiency and high-quality quartz wafer cutting.

Schlagwörter

Stichwörter der Autor:innen

circular path cuttingelectrochemical discharge cutting machiningmicro-helical electrodeorbital circular cuttingquartz wafer

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Chung Yuan Christian University, Taoyuan City 320314, Taiwan.
  • Department of Mechanical Engineering, National Central University, Taoyuan City 320317, Taiwan.

ORCID-Profile: Jung-Chou Hung, Hai-Ping Tsui

Förderung

  • National Science and Technology Council

Zitieren

APA

Wang, A. C., Hung, J. C., Tsai, Y. L., & Tsui, H. P. (2026). Study of the Orbital Circular Cutting in Quartz Wafers Using Electrochemical Discharge Machining with Micro-Electrodes. Micromachines, 17(7), 832. https://doi.org/10.3390/mi17070832

Vancouver

Wang AC, Hung JC, Tsai YL, Tsui HP. Study of the Orbital Circular Cutting in Quartz Wafers Using Electrochemical Discharge Machining with Micro-Electrodes. Micromachines. 2026;17(7):832. doi:10.3390/mi17070832

BibTeX
@article{Wang2026,
  author = {Wang, A-Cheng and Hung, Jung-Chou and Tsai, Yu-Lun and Tsui, Hai-Ping},
  title = {Study of the Orbital Circular Cutting in Quartz Wafers Using Electrochemical Discharge Machining with Micro-Electrodes},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {7},
  pages = {832},
  doi = {10.3390/mi17070832}
}
Kostenlos starten →