Design of Cutting Force Dynamometer for Quartz Machining
Journal of Science and Development Economics · 01.07.2026 · (42)
DOI: 10.64632/jsde.42.2026.823 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Science and Development Economics, online erschienen am 01.07.2026. Verfasst von Pham Quoc Phong und 2 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Controlling cutting forces during the machining of brittle materials plays a crucial role in minimizing subsurface damage (SSD) and maintaining the surface quality of the final product. Currently, cutting force measurement devices are often expensive and may not be suitable for the force measurement ranges of specific machining conditions. This paper presents the design and fabrication process of a two-axis (X, Z) cutting force dynamometer, integrating a kinematic decoupling linear guideway mechanism tailored for quartz slicing operations on a cutting machine using diamond abrasive discs. The system utilizes load cell sensors combined with a data acquisition (DAQ) system based on an HX711 24-bit amplifier and an Arduino microcontroller. The study proposes a cutting force spatial transformation model, determining the effective force application angle ($\approx 23^{\circ}$) from geometric parameters based on the actual configuration of the cutting machine (cutting disc $R=50$ mm, workpiece $D=15$ mm) to accurately extract the normal and tangential forces. Simulation results show that the system achieves excellent static linearity ($R^2 > 0.99$) and sensitively records the dynamic force profile corresponding to the advancement of the cutting blade into the workpiece throughout the process. Machining experiments were conducted on quartz. The experimental results indicate that the cutting force distribution along the X and Z axes aligns with the predictions from the simulation results. The device has proven its feasibility to become a core feedback sensor module for Adaptive Force Control (AFRC) systems in future research.
Zitieren
APA
Phong, P. Q., Ha, H. N., & Thuat, T. M. (2026). Design of Cutting Force Dynamometer for Quartz Machining. Journal of Science and Development Economics. https://doi.org/10.64632/jsde.42.2026.823
Vancouver
Phong PQ, Ha HN, Thuat TM. Design of Cutting Force Dynamometer for Quartz Machining. Journal of Science and Development Economics. 2026. doi:10.64632/jsde.42.2026.823
BibTeX
@article{Phong2026,
author = {Phong, Pham Quoc and Ha, Ho Ngoc and Thuat, Thach My},
title = {Design of Cutting Force Dynamometer for Quartz Machining},
journal = {Journal of Science and Development Economics},
year = {2026},
number = {42},
doi = {10.64632/jsde.42.2026.823}
}
EUVIMED