EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Research on Processing Temperature of Atmospheric Pressure Microwave Plasma Based on Fused Silica Etching

Xiang Wu, Bin Fan, Qiang Xin iD, Dawei Luo, Bo Gao, Wei Li iD, Zhentian Guan, Qiang Chen

Micromachines · 25.06.2026 · 17 (7) · 771

DOI: 10.3390/mi17070771 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 25.06.2026. Verfasst von Xiang Wu und 7 weiteren Autor:innen. Beteiligte Einrichtung: Institute of Optics and Electronics, Chinese Academy of Sciences, Chengdu 610209, China. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the processing temperature characteristics and etching behavior of fused silica using an atmospheric pressure microwave plasma jet. The temperature distribution within the processing region was measured in real time via infrared thermography. The effects of microwave input power, argon flow rate, and CF4 flow rate on the processing temperature were systematically examined using a single-factor approach. Experimental results reveal a strong positive correlation between the plasma temperature and microwave power. The temperature initially rises and then declines with increasing argon flow, peaking at 3 slm, while it increases and eventually stabilizes with higher CF4 flow. Fixed-point etching demonstrates that the etching rate increases with rising processing temperature. Furthermore, heat accumulation during prolonged dwell time leads to a nonlinear increase in the removal rate. This effect can be effectively mitigated by employing a multi-segment processing strategy, enabling more stable and controllable material removal. The effectiveness of this processing method has also been verified on a fused quartz sub-mirror.

Schlagwörter

Stichwörter der Autor:innen

etching behavioroptical processingplasmaprocessing methodtemperature characteristics

Autor:innen und Institutionen

  • Institute of Optics and Electronics, Chinese Academy of Sciences, Chengdu 610209, China.
  • University of Chinese Academy of Sciences, Beijing 100049, China.

ORCID-Profile: Qiang Xin, Wei Li

Zitieren

APA

Wu, X., Fan, B., Xin, Q., Luo, D., Gao, B., Li, W., Guan, Z., & Chen, Q. (2026). Research on Processing Temperature of Atmospheric Pressure Microwave Plasma Based on Fused Silica Etching. Micromachines, 17(7), 771. https://doi.org/10.3390/mi17070771

Vancouver

Wu X, Fan B, Xin Q, Luo D, Gao B, Li W, et al. Research on Processing Temperature of Atmospheric Pressure Microwave Plasma Based on Fused Silica Etching. Micromachines. 2026;17(7):771. doi:10.3390/mi17070771

BibTeX
@article{Wu2026,
  author = {Wu, Xiang and Fan, Bin and Xin, Qiang and Luo, Dawei and Gao, Bo and Li, Wei and Guan, Zhentian and Chen, Qiang},
  title = {Research on Processing Temperature of Atmospheric Pressure Microwave Plasma Based on Fused Silica Etching},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {7},
  pages = {771},
  doi = {10.3390/mi17070771}
}
Kostenlos starten →