Design of an adjustable low-temperature linear microwave plasma source for atmospheric pressure applications
Physics of Plasmas · 01.01.2025 · 32 (1)
DOI: 10.1063/5.0236387 ↗Kurz gefasst
Fachartikel in der Zeitschrift Physics of Plasmas, online erschienen am 13.01.2025. Verfasst von Ao Qu und 3 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0). Gefördert von: Natural Science Foundation of Sichuan Province, Sichuan University.
Abstract (Originalsprache)
Linear plasmas, compared to small-area low-temperature plasma jets, offer a larger single-treatment area with a brush-like pattern, making them highly promising for various applications. This paper introduces the design of an adjustable low-temperature linear plasma source that operates under atmospheric pressure at 2.45 GHz. The design integrated microwave theory with dielectric barrier discharge principles, utilizing a resonant structure based on a microstrip power divider with one end open and the other shorted. The ground plane of the microstrip structure was replaced by a metal plate featuring a large groove. Argon gas was introduced from the short-circuited end and exited through the groove at the open end, where plasma excitation occurred. Experimental results demonstrated that the device, operating at atmospheric pressure, can achieve adjustable linear plasma widths ranging from 10 mm to 50 mm by varying the incident power between 30 and 100 W. Optical emission measurements confirmed the uniformity of the linear plasma, and the gas temperature 5 mm away from the discharge area remained at only 65 °C, even with a microwave incident power of 100 W. This study offers a novel approach to designing linear atmospheric pressure microwave plasma sources, with significant potential for diverse material treatment applications.
Förderung
- Natural Science Foundation of Sichuan Province
- Sichuan University
Zitieren
APA
Qu, A., Chen, Y., Zhang, N., & Wu, L. (2025). Design of an adjustable low-temperature linear microwave plasma source for atmospheric pressure applications. Physics of Plasmas, 32(1). https://doi.org/10.1063/5.0236387
Vancouver
Qu A, Chen Y, Zhang N, Wu L. Design of an adjustable low-temperature linear microwave plasma source for atmospheric pressure applications. Physics of Plasmas. 2025;32(1). doi:10.1063/5.0236387
BibTeX
@article{Qu2025,
author = {Qu, Ao and Chen, Yan and Zhang, Nian and Wu, Li},
title = {Design of an adjustable low-temperature linear microwave plasma source for atmospheric pressure applications},
journal = {Physics of Plasmas},
year = {2025},
volume = {32},
number = {1},
doi = {10.1063/5.0236387}
}
EUVIMED