EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Multi-Objective Machining Parameter Optimization Based on Strain Signal in Turning Process

Ganggang Yin, Ze Wu

Micromachines · 26.05.2026 · 17 (6) · 658

DOI: 10.3390/mi17060658 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 26.05.2026. Verfasst von Ganggang Yin und 1 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, Southeast University, Nanjing 211189, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The optimization of machining parameters directly governs machining quality and efficiency. In this paper, tool holder strain signal is proposed to characterize the cutting process. It is found that the overall variation trend of the strain signal is in complete agreement with the cutting force signals, which are then used to optimize the machining parameters. Then, orthogonal cutting experiments are conducted, and the NSGA-II algorithm is used for multi-objective optimization of strain signal, surface roughness and material removal rate. The regression models derived from the orthogonal experiment results serve as the objective functions. The optimal machining parameters are obtained, with a cutting speed of 140.27 m/min, feed per rotation of 0.19 mm, and depth of cut of 1.47 mm, which offer a reference for practical production.

Schlagwörter

Stichwörter der Autor:innen

machining parameter optimizationstrain signalturning process

Autor:innen und Institutionen

  • School of Mechanical Engineering, Southeast University, Nanjing 211189, China.

Zitieren

APA

Yin, G., & Wu, Z. (2026). Multi-Objective Machining Parameter Optimization Based on Strain Signal in Turning Process. Micromachines, 17(6), 658. https://doi.org/10.3390/mi17060658

Vancouver

Yin G, Wu Z. Multi-Objective Machining Parameter Optimization Based on Strain Signal in Turning Process. Micromachines. 2026;17(6):658. doi:10.3390/mi17060658

BibTeX
@article{Yin2026,
  author = {Yin, Ganggang and Wu, Ze},
  title = {Multi-Objective Machining Parameter Optimization Based on Strain Signal in Turning Process},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {6},
  pages = {658},
  doi = {10.3390/mi17060658}
}
Kostenlos starten →