EUVIMEDAtrasti EUVIMED
Open access · CC BY 4.0

Fast Thermal Monitoring of Pulsed Laser Cleaning Processes

Emiliia Saprykina, Jiří Martan iD, Denys Moskal iD, Milan Honner iD, Šimon Lintimer, Maliha Hussain, Rostislav Medlín iD, Petra Honnerová iD, Vladislav Lang

Micromachines · 2026-05-25 · 17 (6) · 653

DOI: 10.3390/mi17060653 ↗

At a glance

Journal article in Micromachines, published online on 2026-05-25. Written by Emiliia Saprykina and 8 co-authors. Institution: Department of Machining Technology, Faculty of Mechanical Engineering, University of West Bohemia in Pilsen, Univerzitni 8, 301 00 Pilsen, Czech Repu…. 31 references. The full text is freely available (open access, CC BY 4.0). Funded by: University of West Bohemia in Pilsen.

SantraukaSubjectsBibliografiniai duomenysCiteRelated studies

Abstract (original language)

Current manual laser cleaning methods often require highly skilled operators to achieve fast and reliable cleaning. This study investigated the feasibility of measuring thermal processes during laser metal cleaning to support the development of an automated and intelligent laser cleaning system. The measurement system was based on fast infrared (IR) diagnostics and used a field programmable gate array (FPGA) for fast signal analysis. Experiments were conducted on steel substrates covered with paint, scale, or corrosion. Thermal response in real-time for every laser pulse was monitored. Paints showed no solidification plateau, while steel exhibited a clear plateau above the ablation threshold. The scaled surface showed longer time intervals and higher heat accumulation. A histogram of time intervals enabled statistical analysis of the process. Time-resolved temperature values revealed hidden processes. These findings demonstrated the potential of IR thermal diagnostics for evaluating surface conditions and providing real-time data to optimise, monitor, and control laser cleaning processes.

Subjects

Author keywords

infrared thermal diagnosticslaser cleaninglaser–material interactionprocess monitoring

Authors and institutions

  • Department of Machining Technology, Faculty of Mechanical Engineering, University of West Bohemia in Pilsen, Univerzitni 8, 301 00 Pilsen, Czech Republic.
  • New Technologies-Research Centre, University of West Bohemia in Pilsen, Univerzitni 8, 301 00 Pilsen, Czech Republic.
  • Department of Physics, Faculty of Applied Sciences, University of West Bohemia in Pilsen, Univerzitni 8, 301 00 Pilsen, Czech Republic.

ORCID profiles: Jiří Martan, Denys Moskal, Milan Honner, Rostislav Medlín, Petra Honnerová

Funding

  • University of West Bohemia in Pilsen

Cite

APA

Saprykina, E., Martan, J., Moskal, D., Honner, M., Lintimer, Š., Hussain, M., Medlín, R., Honnerová, P., & Lang, V. (2026). Fast Thermal Monitoring of Pulsed Laser Cleaning Processes. Micromachines, 17(6), 653. https://doi.org/10.3390/mi17060653

Vancouver

Saprykina E, Martan J, Moskal D, Honner M, Lintimer Š, Hussain M, et al. Fast Thermal Monitoring of Pulsed Laser Cleaning Processes. Micromachines. 2026;17(6):653. doi:10.3390/mi17060653

BibTeX
@article{Saprykina2026,
  author = {Saprykina, Emiliia and Martan, Jiří and Moskal, Denys and Honner, Milan and Lintimer, Šimon and Hussain, Maliha and Medlín, Rostislav and Honnerová, Petra and Lang, Vladislav},
  title = {Fast Thermal Monitoring of Pulsed Laser Cleaning Processes},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {6},
  pages = {653},
  doi = {10.3390/mi17060653}
}
Start for free →