Miniaturized Flexible Corrosion-Resistant Tag Antenna with Folding Arm Based on Graphene Film
Micromachines · 21.05.2026 · 17 (5) · 634
DOI: 10.3390/mi17050634 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 21.05.2026. Verfasst von Meng Zeng und 6 weiteren Autor:innen. Beteiligte Einrichtung: Hubei Engineering Research Center of RF-Microwave Technology and Application, Wuhan University of Technology, Wuhan 430070, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Fundamental Research Funds for the Central Universities, Outstanding Young Talents of Hubei Province.
Abstract (Originalsprache)
Radio frequency identification (RFID) technology has been widely adopted in a variety of practical applications. Usually, the size of a passive tag antenna largely determines the read performance of tag. However, excessively large tag antennas can hinder their practical application and a tag that is too small has poor performance. In this paper, a compact, flexible and corrosion-resistant folding dipole tag antenna is proposed, which has a geometrical dimension of 24 mm × 13 mm (0.074λ0×0.040λ0). It is designed on only one surface of a flexible polyethylene terephthalate (PET) substrate, which can be folded. The paper proposes a single-sided laser-patterned GAF/PET flexible RFID tag that is mechanically folded to form a backside dipole arm without vias, targeting compact and corrosion-resistant UHF RFID operation. Changing the size of the folding arm can effectively adjust the resonant frequency and impedance of the tag antenna. A stepped radiation arm is used to extend the current path and lower the resonance frequency. The capacitance and inductance effects introduced by loading a T match for reducing the resonant frequency of the tag to the useful UHF RFID band. Finally, it can achieve a power transfer coefficient of 99.9% and exhibit high impedance matching between the tag antenna and the chip. The proposed tag antenna uses graphene-assembled film (GAF) as its conductor material. Thanks to the physicochemical properties of GAF, the proposed tag antenna maintains stable radiation performance even after prolonged exposure to acidic (5 wt%), alkaline (5 wt%), and salt (5 wt%) corrosion, as well as more than 1000 mechanical bending cycles. When the EIRP of the reader is 2.2 W, the maximum read range of the tag in the 800–1000 MHz is 1.38 m.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Hubei Engineering Research Center of RF-Microwave Technology and Application, Wuhan University of Technology, Wuhan 430070, China.
- School of Information Engineering, Wuhan University of Technology, Wuhan 430070, China.
ORCID-Profile: Daping He
Förderung
- National Natural Science Foundation of China
- Fundamental Research Funds for the Central Universities
- Outstanding Young Talents of Hubei Province
- Natural Science Foundation of Hubei Province
Zitieren
APA
Zeng, M., Zhao, X., Zhou, H., Li, J., Song, R., Zu, H., & He, D. (2026). Miniaturized Flexible Corrosion-Resistant Tag Antenna with Folding Arm Based on Graphene Film. Micromachines, 17(5), 634. https://doi.org/10.3390/mi17050634
Vancouver
Zeng M, Zhao X, Zhou H, Li J, Song R, Zu H, et al. Miniaturized Flexible Corrosion-Resistant Tag Antenna with Folding Arm Based on Graphene Film. Micromachines. 2026;17(5):634. doi:10.3390/mi17050634
BibTeX
@article{Zeng2026,
author = {Zeng, Meng and Zhao, Xin and Zhou, Hongyu and Li, Jinling and Song, Rongguo and Zu, Haoran and He, Daping},
title = {Miniaturized Flexible Corrosion-Resistant Tag Antenna with Folding Arm Based on Graphene Film},
journal = {Micromachines},
year = {2026},
volume = {17},
number = {5},
pages = {634},
doi = {10.3390/mi17050634}
}
EUVIMED