Flexible Graphene-Based S-Band Metasurface Conformal Array Antenna for UAV Platforms
Materials · 04.06.2026 · 19 (11) · 2404
DOI: 10.3390/ma19112404 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 04.06.2026. Verfasst von Jinling Li und 5 weiteren Autor:innen. Beteiligte Einrichtung: Hubei Engineering Research Center of RF-Microwave Technology and Application, Wuhan University of Technology, Wuhan 430070, China. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science and Technology Department of Hubei Province, Fundamental Research Funds for the Central Universities.
Abstract (Originalsprache)
There is a substantial demand for lightweight, low-profile, and conformal antenna integration on the wing platforms of unmanned aerial vehicles (UAVs). This paper presents an S-band (2–4 GHz) flexible conformal metasurface array antenna based on a highly conductive graphene-assembled film (GAF). The main contributions of this work are twofold. First, flexible and highly conductive GAF is used as the conductor together with a flexible polyimide (PI) dielectric substrate to form a GAF-based wing-conformal antenna configuration with a low-profile, lightweight, and easily conformal performance. Second, a GAF conformal antenna element is developed by combining a dipole antenna with a directive and reflective frequency selective surface (FSS), achieving effective control of the beam and stable directional radiation at 2.4 GHz. Full-wave simulations using CST Studio Suite show that the directive FSS narrows the feed beam, whereas the reflective FSS redirects and narrows the H-plane radiation. The simulated results show that the integrated wing-conformal antenna operates over 2.19–2.65 GHz and achieves a gain of 4.65 dBi at 2.4 GHz. The measurement results indicate that the GAF conformal antenna and 1 × 4 GAF conformal array antenna shows measured reflection coefficients below −10 dB at 2.4 GHz and effective adjacent-element isolation. In addition, simulated results indicate that the GAF array antenna can perform beam scanning within the ±40° range, verifying the beam-control capability of this structure for UAV forward communication. Overall, this work highlights the feasibility of using GAF as a conductive material for both a high-efficiency radiator and an FSS beamforming structure, offering a practical material and design approach for lightweight, low-profile, and wing-conformal airborne array antennas.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Hubei Engineering Research Center of RF-Microwave Technology and Application, Wuhan University of Technology, Wuhan 430070, China.
- School of Information Engineering, Wuhan University of Technology, Wuhan 430070, China.
ORCID-Profile: Jinling Li
Förderung
- National Natural Science Foundation of China
- Science and Technology Department of Hubei Province
- Fundamental Research Funds for the Central Universities
- Natural Science Foundation of Hubei Province
Zitieren
APA
Li, J., Li, P., Zeng, M., Xin, Y., Zu, H., & Song, R. (2026). Flexible Graphene-Based S-Band Metasurface Conformal Array Antenna for UAV Platforms. Materials, 19(11), 2404. https://doi.org/10.3390/ma19112404
Vancouver
Li J, Li P, Zeng M, Xin Y, Zu H, Song R. Flexible Graphene-Based S-Band Metasurface Conformal Array Antenna for UAV Platforms. Materials. 2026;19(11):2404. doi:10.3390/ma19112404
BibTeX
@article{Li2026,
author = {Li, Jinling and Li, Peng and Zeng, Meng and Xin, Yitong and Zu, Haoran and Song, Rongguo},
title = {Flexible Graphene-Based S-Band Metasurface Conformal Array Antenna for UAV Platforms},
journal = {Materials},
year = {2026},
volume = {19},
number = {11},
pages = {2404},
doi = {10.3390/ma19112404}
}
EUVIMED