Additively Manufactured Density-Graded Dual-Material Auxetic Structures: Enhanced Energy Absorption and Shape Recovery
Micromachines · 03.05.2026 · 17 (5) · 570
DOI: 10.3390/mi17050570 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 03.05.2026. Verfasst von Mohammad Faisal Ahmed und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Industrial and Engineering Technology, Southeastern Louisiana University, 801 N. Oak Street, Hammond, LA 70402, USA. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The auxetic reentrant structure, one of the most widely studied negative Poisson’s ratio structures for its geometric simplicity, has long seen limited applications due to challenges emanating from its inherent design when built from a single rigid or flexible material. This paper aims to address these challenges by taking advantage of dual-material extrusion technology and density gradient design strategy. Two density gradient reentrant auxetic structures are proposed and fabricated using material extrusion additive manufacturing in single-material (flexible) and dual-material (rigid/flexible) modes, with the introduction of a novel dual-material interface design. In-plane compression tests are carried out to assess the energy absorption characteristics of the structures. The results show that dual-material structures exhibit higher yield stress, mean crushing force, peak crushing force, and maximum crushing force, as well as superior specific energy, energy dissipation, and energy release compared to single-material structures. Dual-material structures also demonstrate high lateral stiffness, minimizing elastic instability, a highly desirable feature for reusable energy-absorbing structures with high shape recovery capability. The results substantiate the significance of the synergy between the dual-material and density gradient designs proposed in this study. Overall, the key findings of the study may serve as a reliable reference for the design of future lightweight energy-absorbing structures.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Industrial and Engineering Technology, Southeastern Louisiana University, 801 N. Oak Street, Hammond, LA 70402, USA.
ORCID-Profile: Mohammad Faisal Ahmed
Zitieren
APA
Ahmed, M. F., & Primes, K. (2026). Additively Manufactured Density-Graded Dual-Material Auxetic Structures: Enhanced Energy Absorption and Shape Recovery. Micromachines, 17(5), 570. https://doi.org/10.3390/mi17050570
Vancouver
Ahmed MF, Primes K. Additively Manufactured Density-Graded Dual-Material Auxetic Structures: Enhanced Energy Absorption and Shape Recovery. Micromachines. 2026;17(5):570. doi:10.3390/mi17050570
BibTeX
@article{Ahmed2026,
author = {Ahmed, Mohammad Faisal and Primes, Kyle},
title = {Additively Manufactured Density-Graded Dual-Material Auxetic Structures: Enhanced Energy Absorption and Shape Recovery},
journal = {Micromachines},
year = {2026},
volume = {17},
number = {5},
pages = {570},
doi = {10.3390/mi17050570}
}
EUVIMED