EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Volumetric Control vs. Pneumatic Pressure: A Comparative Analysis of Extrusion in 3D Bioprinting

Doru-Daniel Cristea iD, Eduard Liciu, Andreea Trifan iD, Corneliu Bălan iD

Micromachines · 24.04.2026 · 17 (5) · 521

DOI: 10.3390/mi17050521 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 24.04.2026. Verfasst von Doru-Daniel Cristea und 3 weiteren Autor:innen. Beteiligte Einrichtung: 3D Printing Laboratory, Center of Innovation and e-Health, Carol Davila University of Medicine and Pharmacy, 020021 Bucharest, Romania. Die Arbeit nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministerul Cercetării și Inovării, Ministry of Research, Innovation and Digitization.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Extrusion-based bioprinting faces significant challenges in achieving the shape fidelity and internal porosity necessary for cell viability, often hindered by subjective assessment methods. This study investigated the relationship between rheological properties and print quality using a natural polymer biomaterial ink composed of 12% gelatin, 5% alginate, and 1% carboxymethylcellulose. We conducted a comparative analysis between traditional pneumatic systems and screw-driven volumetric extrusion, utilizing a suite of quantitative metrics: Spreading Ratio (SR), Printability Index (Pr), Uniformity Ratio (UF), Collapse Angle (θ), and evaluated porosity. Our results demonstrate that the screw-driven system’s positive displacement mechanism provides superior control over filament morphology by enabling precise volumetric modulation. While the pneumatic system exhibited a high SR of 1.82 and the lowest porosity at 59.92%, the screw-driven system allowed for “under-extrusion” to compensate for viscoelastic die swell. Reducing the flow rate to 50% in the screw system lowered the SR to 1.09, nearly matching the nozzle diameter, and increased porosity to 76.46%. Furthermore, the screw-driven system achieved an ideal Pr of 1.0, whereas the pneumatic system produced distorted, rounded pores with a Pr of 1.57. The findings indicate that screw-driven extruders can decouple line complex rheology from the printing process, allowing for finer spatial resolution and better pore interconnectivity.

Schlagwörter

Stichwörter der Autor:innen

3D bioprintingDIWbiomaterial inkquality assessment

Autor:innen und Institutionen

  • 3D Printing Laboratory, Center of Innovation and e-Health, Carol Davila University of Medicine and Pharmacy, 020021 Bucharest, Romania.
  • REOROM Laboratory, Hydraulics Department, Power Engineering Faculty, National University of Science and Technology Politehnica Bucharest, 060042 Bucharest, Romania.
  • Faculty of Chemical Engineering and Biotechnologies, University Politehnica of Bucharest, 011061 Bucharest, Romania.

ORCID-Profile: Doru-Daniel Cristea, Andreea Trifan, Corneliu Bălan

Förderung

  • Ministerul Cercetării și Inovării
  • Ministry of Research, Innovation and Digitization

Zitieren

APA

Cristea, D. D., Liciu, E., Trifan, A., & Bălan, C. (2026). Volumetric Control vs. Pneumatic Pressure: A Comparative Analysis of Extrusion in 3D Bioprinting. Micromachines, 17(5), 521. https://doi.org/10.3390/mi17050521

Vancouver

Cristea DD, Liciu E, Trifan A, Bălan C. Volumetric Control vs. Pneumatic Pressure: A Comparative Analysis of Extrusion in 3D Bioprinting. Micromachines. 2026;17(5):521. doi:10.3390/mi17050521

BibTeX
@article{Cristea2026,
  author = {Cristea, Doru-Daniel and Liciu, Eduard and Trifan, Andreea and Bălan, Corneliu},
  title = {Volumetric Control vs. Pneumatic Pressure: A Comparative Analysis of Extrusion in 3D Bioprinting},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {5},
  pages = {521},
  doi = {10.3390/mi17050521}
}
Kostenlos starten →