EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Ultra-Precision Fabrication of Freeform Fresnel Lenses for Generating Rectangular Dark Hollow Beams

Juan Zhang, Qilu Huang, Yingxin Xu, Chaocheng Yang, Tingdi Liao

Micromachines · 03.04.2026 · 17 (4) · 448

DOI: 10.3390/mi17040448 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 03.04.2026. Verfasst von Juan Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Photonics Technology, Quanzhou Normal University, Quanzhou 362000, China. Die Arbeit nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Higher Education Institution-Industry-Research Collaboration Program of Fujian Province, Quanzhou Major Science and Technology Special Project.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Freeform Fresnel lenses combine the powerful beam-shaping capability of freeform optics with the lightweight and compact characteristics of conventional Fresnel structures, leading to their increasing adoption across diverse applications. This paper proposes and experimentally validates a method for generating rectangular dark hollow beams using a freeform Fresnel lens. The lens is divided into multiple fan-shaped sectors centered on the optical axis, with each sector generating a defocused spot at a distinct spatial location. Based on geometrical optics, a freeform Fresnel lens with a 25 mm aperture is designed to produce a square hollow beam with a side length of 10 mm. A lens with a division angle of 5° was fabricated using ultra-precision diamond turning. The angular form error was measured to be below 0.1°, and the surface roughness was found to be below 10 nm. An optical testing system was established to characterize the generated beam profile. The experimental results successfully demonstrate the formation of the desired rectangular dark hollow beam. The measured results agree well with the simulations, confirming the feasibility and practical potential of the proposed method.

Schlagwörter

Stichwörter der Autor:innen

beam shapingfreeform Fresnel lensrectangular dark hollow beamultra-precision diamond turning

Autor:innen und Institutionen

  • Institute for Photonics Technology, Quanzhou Normal University, Quanzhou 362000, China.
  • College of Photonic and Electronic Information Engineering, Fujian Normal University, Fuzhou 350000, China.
  • Fujian Provincial Collaborative Innovation Center for Ultra-Precision Optical Engineering and Applications, Quanzhou 362000, China.
  • Fujian Provincial Key Laboratory for Advanced Micro-Nano Photonics Technology and Devices, Quanzhou 362000, China.

Förderung

  • Higher Education Institution-Industry-Research Collaboration Program of Fujian Province
  • Quanzhou Major Science and Technology Special Project

Zitieren

APA

Zhang, J., Huang, Q., Xu, Y., Yang, C., & Liao, T. (2026). Design and Ultra-Precision Fabrication of Freeform Fresnel Lenses for Generating Rectangular Dark Hollow Beams. Micromachines, 17(4), 448. https://doi.org/10.3390/mi17040448

Vancouver

Zhang J, Huang Q, Xu Y, Yang C, Liao T. Design and Ultra-Precision Fabrication of Freeform Fresnel Lenses for Generating Rectangular Dark Hollow Beams. Micromachines. 2026;17(4):448. doi:10.3390/mi17040448

BibTeX
@article{Zhang2026,
  author = {Zhang, Juan and Huang, Qilu and Xu, Yingxin and Yang, Chaocheng and Liao, Tingdi},
  title = {Design and Ultra-Precision Fabrication of Freeform Fresnel Lenses for Generating Rectangular Dark Hollow Beams},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {4},
  pages = {448},
  doi = {10.3390/mi17040448}
}
Kostenlos starten →