EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Finite Element Simulation of Filling Behaviors in Precision Glass Molding of Fresnel Glass Lenses

Renwei Gao, Jianmin Tan, Jian Zhou

Journal of Manufacturing and Materials Processing · 07.08.2026 · 10 (8) · 287

DOI: 10.3390/jmmp10080287 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Manufacturing and Materials Processing, online erschienen am 07.08.2026. Verfasst von Renwei Gao und 2 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Precision glass molding is a promising yet challenging approach for fabricating Fresnel glass lenses, as their complex multi-ring microstructures tend to induce nonuniform glass flow and incomplete filling. To elucidate the filling behaviors under compression, a thermo-mechanically coupled finite element model was developed to simulate the molding process. The ring filling ratios of each ring and the total lens were adopted as a quantitative metric to systematically investigate the effects of molding temperature, molding pressure, glass–mold interfacial friction coefficient, and the number of Fresnel rings on glass flow and filling behavior. The results show that filling proceeds sequentially from the inner rings to the outer rings. Increasing the interfacial friction coefficient or the number of Fresnel rings significantly increases flow resistance, suppresses radial glass flow, and prolongs the filling time. In contrast, higher molding temperature and pressure promote glass flow, improve the filling efficiency of multi-ring microstructures, and identify the critical processing window for complete filling. These findings provide fundamental insights into the filling behavior of Fresnel microstructures during precision glass molding and offer a theoretical basis for process optimization and the high-precision fabrication of Fresnel lenses.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Gao, R., Tan, J., & Zhou, J. (2026). Finite Element Simulation of Filling Behaviors in Precision Glass Molding of Fresnel Glass Lenses. Journal of Manufacturing and Materials Processing, 10(8), 287. https://doi.org/10.3390/jmmp10080287

Vancouver

Gao R, Tan J, Zhou J. Finite Element Simulation of Filling Behaviors in Precision Glass Molding of Fresnel Glass Lenses. Journal of Manufacturing and Materials Processing. 2026;10(8):287. doi:10.3390/jmmp10080287

BibTeX
@article{Gao2026,
  author = {Gao, Renwei and Tan, Jianmin and Zhou, Jian},
  title = {Finite Element Simulation of Filling Behaviors in Precision Glass Molding of Fresnel Glass Lenses},
  journal = {Journal of Manufacturing and Materials Processing},
  year = {2026},
  volume = {10},
  number = {8},
  pages = {287},
  doi = {10.3390/jmmp10080287}
}
Kostenlos starten →