EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Linearity Improvement of MEMS Electrochemical Vibration Sensors Based on Tapered-Hole Technology

Hongmin Jiang, Honghao Zhang, Wenlang Zhao, Yulan Lu iD, Deyong Chen, Junbo Wang

Micromachines · 09.03.2026 · 17 (3) · 333

DOI: 10.3390/mi17030333 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 09.03.2026. Verfasst von Hongmin Jiang und 5 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Transducer Technology, Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing 100190, China. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deep Earth Probe and Mineral Resources Exploration - National Science and Technology Major Project, Strategic Priority Research Program (B) of the Chinese Academy of Sciences, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electrochemical vibration sensors offer high sensitivity, low mechanical noise, and superior low-frequency performance, making them attractive for applications such as seismic detection and underwater acoustic sensing. However, existing electrochemical seismometers, angular accelerometers, and vector hydrophones primarily focus on sensitivity and noise, while sensor linearity—especially across wide frequency ranges—remains insufficiently investigated. In practice, linearity degradation frequently occurs at low and high frequencies due to diffusion limitations of electroactive species in the electrolyte. In this study, the linearity mechanism of electrochemical vibration sensors is analyzed, and two key structural parameters affecting linearity are identified: one is the anode–cathode spacing and the other is the effective cathode length. To improve linearity, an electrochemical sensing electrode incorporating an ultra-narrow insulating ring and a tapered micro-orifice is proposed. Finite element simulations are performed to evaluate the effects of electrode spacing, orifice geometry and excitation frequency. The sensor is fabricated using MEMS fabrication technology and experimentally characterized. Results show a peak sensitivity of 1242 V/(m/s) and excellent linearity within an input velocity range of 0.0002–0.012 m/s at 5 Hz, 10 Hz, 40 Hz and 100 Hz, with correlation coefficients exceeding 0.998. The proposed design provides an effective approach for linearity enhancement in electrochemical vibration sensors.

Schlagwörter

Stichwörter der Autor:innen

MEMS electrodeelectrochemical vibration sensorlinearitytapered hole

Autor:innen und Institutionen

  • State Key Laboratory of Transducer Technology, Aerospace Information Research Institute, Chinese Academy of Sciences, Beijing 100190, China.
  • School of Electronic, Electrical and Communication Engineering, University of Chinese Academy of Sciences, Beijing 100049, China.

ORCID-Profile: Yulan Lu

Förderung

  • Deep Earth Probe and Mineral Resources Exploration - National Science and Technology Major Project
  • Strategic Priority Research Program (B) of the Chinese Academy of Sciences
  • National Natural Science Foundation of China
  • Beijing Natural Science Foundation
  • Youth Innovation Promotion Association CAS
  • Deep Earth Probe and Mineral Resources Exploration—National Science and Technology Major Project

Zitieren

APA

Jiang, H., Zhang, H., Zhao, W., Lu, Y., Chen, D., & Wang, J. (2026). Linearity Improvement of MEMS Electrochemical Vibration Sensors Based on Tapered-Hole Technology. Micromachines, 17(3), 333. https://doi.org/10.3390/mi17030333

Vancouver

Jiang H, Zhang H, Zhao W, Lu Y, Chen D, Wang J. Linearity Improvement of MEMS Electrochemical Vibration Sensors Based on Tapered-Hole Technology. Micromachines. 2026;17(3):333. doi:10.3390/mi17030333

BibTeX
@article{Jiang2026,
  author = {Jiang, Hongmin and Zhang, Honghao and Zhao, Wenlang and Lu, Yulan and Chen, Deyong and Wang, Junbo},
  title = {Linearity Improvement of MEMS Electrochemical Vibration Sensors Based on Tapered-Hole Technology},
  journal = {Micromachines},
  year = {2026},
  volume = {17},
  number = {3},
  pages = {333},
  doi = {10.3390/mi17030333}
}
Kostenlos starten →