EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of the Diagnostic Sensitivity of Digital Vibration Sensors Based on Capacitive MEMS Accelerometers

Marek Fidali iD, Damian Augustyn iD, Jakub Ochmann iD, Wojciech Uchman iD

Sensors · 10.07.2024 · 24 (14) · 4463

DOI: 10.3390/s24144463 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Sensors, online erschienen am 10.07.2024. Verfasst von Marek Fidali und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Fundamentals of Machinery Design, Silesian University of Technology, Konarskiego 18A, 44-100 Gliwice, Poland. Die Arbeit wurde bisher 12-mal zitiert (Crossref) und nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Silesian University of Technology, Silesian University of Technology statutory research funds.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, there has been an increasing use of digital vibration sensors that are based on capacitive MEMS accelerometers for machine vibration monitoring and diagnostics. These sensors simplify the design of monitoring and diagnostic systems, thus reducing implementation costs. However, it is important to understand how effective these digital sensors are in detecting rolling bearing faults. This article describes a method for determining the diagnostic sensitivity of diagnostic parameters provided by commercially available vibration sensors based on MEMS accelerometers. Experimental tests were conducted in laboratory conditions, during which vibrations from 11 healthy and faulty rolling bearings were measured using two commercial vibration sensors based on MEMS accelerometers and a piezoelectric accelerometer as a reference sensor. The results showed that the diagnostic sensitivity of the parameters depends on the upper-frequency band limit of the sensors, and the parameters most sensitive to the typical fatigue faults of rolling bearings are the peak and peak-to-peak amplitudes of vibration acceleration. Despite having a lower upper-frequency range compared to the piezoelectric accelerometer, the commercial vibration sensors were found to be sensitive to rolling bearing faults and can be successfully used in continuous monitoring and diagnostics systems for machines.

Schlagwörter

Stichwörter der Autor:innen

MEMS accelerometerbearing faultscondition monitoringdiagnosticsvibration measurement

Autor:innen und Institutionen

  • Department of Fundamentals of Machinery Design, Silesian University of Technology, Konarskiego 18A, 44-100 Gliwice, Poland.
  • Department of Power Engineering and Turbomachinery, Silesian University of Technology, Konarskiego 18, 44-100 Gliwice, Poland.

ORCID-Profile: Marek Fidali, Damian Augustyn, Jakub Ochmann, Wojciech Uchman

Förderung

  • Silesian University of Technology
  • Silesian University of Technology statutory research funds

Zitieren

APA

Fidali, M., Augustyn, D., Ochmann, J., & Uchman, W. (2024). Evaluation of the Diagnostic Sensitivity of Digital Vibration Sensors Based on Capacitive MEMS Accelerometers. Sensors, 24(14), 4463. https://doi.org/10.3390/s24144463

Vancouver

Fidali M, Augustyn D, Ochmann J, Uchman W. Evaluation of the Diagnostic Sensitivity of Digital Vibration Sensors Based on Capacitive MEMS Accelerometers. Sensors. 2024;24(14):4463. doi:10.3390/s24144463

BibTeX
@article{Fidali2024,
  author = {Fidali, Marek and Augustyn, Damian and Ochmann, Jakub and Uchman, Wojciech},
  title = {Evaluation of the Diagnostic Sensitivity of Digital Vibration Sensors Based on Capacitive MEMS Accelerometers},
  journal = {Sensors},
  year = {2024},
  volume = {24},
  number = {14},
  pages = {4463},
  doi = {10.3390/s24144463}
}
Kostenlos starten →