Cationic and Non-Ionic Surfactant–Assisted Morphological Engineering of CoMoO4 for High-Performance Asymmetric Supercapacitors
Micromachines · 09.01.2026 · 17 (1) · 89
DOI: 10.3390/mi17010089 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 09.01.2026. Verfasst von Pritam J Morankar und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Republic of Korea. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea (NRF) grant funded by the Korea government(MIST), National Research Foundation of Korea.
Abstract (Originalsprache)
Precise morphology engineering is essential for enhancing the charge-storage capabilities of cobalt molybdate (CoMoO4). In this study, cobalt molybdate (CoMoO4, abbreviated as CoMo), cobalt molybdate–cetyltrimethylammonium bromide (CoMo-CTAB), and cobalt molybdate–cetyltrimethylammonium bromide/polyethylene glycol (CoMo-CTAB/PEG) electrodes were synthesized through a cationic–nonionic surfactant-assisted hydrothermal route. he introduction of CTAB promoted the formation of well-defined nanoflake structures, whereas the synergistic CTAB/PEG system produced a highly porous and interconnected nanosheet architecture, enabling enhanced electrolyte diffusion and redox accessibility. As a result, the CoMo-CTAB/PEG electrode delivered a high areal capacitance of 10.321 F cm−2 at 10 mA cm−2, markedly outperforming CoMo-CTAB and pristine CoMo electrodes. It also exhibited good rate capability, maintaining 63.64% of its capacitance at 50 mA cm−2. Long-term cycling tests revealed excellent durability, with over 83% capacitance retention after 12,000 cycles and high coulombic efficiency, indicating highly reversible Faradaic behavior. Moreover, an asymmetric pouch-type supercapacitor device (APSD) assembled using the optimized electrode demonstrated robust cycling stability. These findings underscore surfactant-directed morphology modulation as an effective and scalable strategy for developing high-performance CoMoO4-based supercapacitor electrodes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Chemical Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Republic of Korea.
- Division of Electronics and Electrical Engineering, Dongguk University-Seoul, Seoul 04620, Republic of Korea.
ORCID-Profile: Pritam J Morankar, Aviraj M Teli, Chan-Wook Jeon
Förderung
- National Research Foundation of Korea (NRF) grant funded by the Korea government(MIST)
- National Research Foundation of Korea
Zitieren
APA
Morankar, P. J., Teli, A. M., & Jeon, C. W. (2026). Cationic and Non-Ionic Surfactant–Assisted Morphological Engineering of CoMoO4 for High-Performance Asymmetric Supercapacitors. Micromachines, 17(1), 89. https://doi.org/10.3390/mi17010089
Vancouver
Morankar PJ, Teli AM, Jeon CW. Cationic and Non-Ionic Surfactant–Assisted Morphological Engineering of CoMoO4 for High-Performance Asymmetric Supercapacitors. Micromachines. 2026;17(1):89. doi:10.3390/mi17010089
BibTeX
@article{Morankar2026,
author = {Morankar, Pritam J and Teli, Aviraj M and Jeon, Chan-Wook},
title = {Cationic and Non-Ionic Surfactant–Assisted Morphological Engineering of CoMoO4 for High-Performance Asymmetric Supercapacitors},
journal = {Micromachines},
year = {2026},
volume = {17},
number = {1},
pages = {89},
doi = {10.3390/mi17010089}
}
EUVIMED