EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Dual Surfactant-Assisted Hydrothermal Engineering of Co3V2O8 Nanostructures for High-Performance Asymmetric Supercapacitors

Pritam J Morankar iD, Aditya A Patil iD, Aviraj Teli, Chan-Wook Jeon iD

Micromachines · 27.11.2025 · 16 (12) · 1334

DOI: 10.3390/mi16121334 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 27.11.2025. Verfasst von Pritam J Morankar und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Republic of Korea. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government, National Research Foundation of Korea.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a dual surfactant-assisted hydrothermal approach for the synthesis of Co3V2O8 (CoVO) nanostructures and their surfactant-modified derivatives, PVP-assisted Co3V2O8 (P-CoVO) and PVP–SDS co-assisted Co3V2O8 (P/S-CoVO), which were directly grown on nickel foam. The use of PVP and SDS enabled controlled nucleation and growth, yielding a hierarchical nanoflower-like morphology in P/S-CoVO with increased porosity, a higher surface area, and uniform structural features. Comprehensive physicochemical characterization confirmed that surfactant incorporation effectively modulated particle size, dispersion, and active-site availability. Electrochemical measurements demonstrated that P/S-CoVO exhibited superior performance, with the largest CV area, low equivalent series resistance (0.52 Ω), and a maximum areal capacitance of 13.71 F cm−2 at 8 mA cm−2, attributable to rapid redox kinetics and efficient ion transport. The electrode also showed excellent cycling stability, retaining approximately 83.7% of its initial capacitance after 12,000 charge–discharge cycles, indicating robust structural integrity and interfacial stability. Additionally, an asymmetric supercapacitor device (P/S-CoVO//AC) delivered a high energy density of 0.082 mWh cm−2, a power density of 1.25 mW cm−2, and stable operation within a 1.5 V potential window. These results demonstrate that cooperative surfactant engineering provides an effective and scalable strategy to enhance the morphology, electrochemical kinetics, and durability of Co3V2O8-based electrodes for next-generation high-performance supercapacitors.

Schlagwörter

Stichwörter der Autor:innen

PVP/SDSasymmetric supercapacitorhydrothermal synthesisnanoflower morphologypseudocapacitance

Autor:innen und Institutionen

  • School of Chemical Engineering, Yeungnam University, 280 Daehak-Ro, Gyeongsan 38541, Republic of Korea.
  • Division of Electronics and Electrical Engineering, Dongguk University-Seoul, Seoul 04620, Republic of Korea.

ORCID-Profile: Pritam J Morankar, Aditya A Patil, Chan-Wook Jeon

Förderung

  • This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government
  • National Research Foundation of Korea

Zitieren

APA

Morankar, P. J., Patil, A. A., Teli, A., & Jeon, C. W. (2025). Dual Surfactant-Assisted Hydrothermal Engineering of Co3V2O8 Nanostructures for High-Performance Asymmetric Supercapacitors. Micromachines, 16(12), 1334. https://doi.org/10.3390/mi16121334

Vancouver

Morankar PJ, Patil AA, Teli A, Jeon CW. Dual Surfactant-Assisted Hydrothermal Engineering of Co3V2O8 Nanostructures for High-Performance Asymmetric Supercapacitors. Micromachines. 2025;16(12):1334. doi:10.3390/mi16121334

BibTeX
@article{Morankar2025,
  author = {Morankar, Pritam J and Patil, Aditya A and Teli, Aviraj and Jeon, Chan-Wook},
  title = {Dual Surfactant-Assisted Hydrothermal Engineering of Co3V2O8 Nanostructures for High-Performance Asymmetric Supercapacitors},
  journal = {Micromachines},
  year = {2025},
  volume = {16},
  number = {12},
  pages = {1334},
  doi = {10.3390/mi16121334}
}
Kostenlos starten →