EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Analysis of the Material Removal Process in Precision Milling of AZ91D Magnesium Alloy

Jarosław Korpysa iD

Micromachines · 13.11.2025 · 16 (11) · 1283

DOI: 10.3390/mi16111283 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 13.11.2025. Verfasst von Jarosław Korpysa. Beteiligte Einrichtung: Department of Production Engineering, Lublin University of Technology, 20-618 Lublin, Poland. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Centre.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The study investigated the material removal process during precision milling of AZ91D magnesium alloy. A high-speed camera enabling high-frequency image recording was used to observe the cutting zone. In effect, it was possible to observe the mechanism of the chip formation process at different stages of the cutting flutes performance. Experiments were conducted with different feeds per tooth in order to detect the occurrence of ploughing. Results showed that the both cutting flutes of the end mill did not perform in a uniform manner. Material was predominantly removed by first flute, as a result of which chips formed by this flute were much larger than those generated by the other flute. Nevertheless, the shearing process proceeded effectively even at low feed values. Results also showed that large burrs were formed when machining was conducted with low feed per tooth, which confirmed a significant contribution of plastic deformation to burrs formation. An increase in feed per tooth, however, made it possible to minimize the phenomenon of burrs formation.

Schlagwörter

Stichwörter der Autor:innen

burrschip formationmagnesium alloyploughingprecision milling

Autor:innen und Institutionen

  • Department of Production Engineering, Lublin University of Technology, 20-618 Lublin, Poland.

ORCID-Profile: Jarosław Korpysa

Förderung

  • National Science Centre

Zitieren

APA

Korpysa, J. (2025). Analysis of the Material Removal Process in Precision Milling of AZ91D Magnesium Alloy. Micromachines, 16(11), 1283. https://doi.org/10.3390/mi16111283

Vancouver

Korpysa J. Analysis of the Material Removal Process in Precision Milling of AZ91D Magnesium Alloy. Micromachines. 2025;16(11):1283. doi:10.3390/mi16111283

BibTeX
@article{Korpysa2025,
  author = {Korpysa, Jarosław},
  title = {Analysis of the Material Removal Process in Precision Milling of AZ91D Magnesium Alloy},
  journal = {Micromachines},
  year = {2025},
  volume = {16},
  number = {11},
  pages = {1283},
  doi = {10.3390/mi16111283}
}
Kostenlos starten →