EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication of Micro-Holes with High Aspect Ratios in Cf/SiC Composites Using Coaxial Waterjet-Assisted Nanosecond Laser Drilling

Chenhu Yuan, Zenggan Bian, Yue Cao iD, Yinan Xiao, Bin Wang, Jianting Guo, Liyuan Sheng iD

Micromachines · 14.07.2025 · 16 (7) · 811

DOI: 10.3390/mi16070811 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 14.07.2025. Verfasst von Chenhu Yuan und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510641, China. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shenzhen Science and Technology Program, Director's Fund of Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, IER foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In the present study, the coaxial waterjet-assisted nanosecond laser drilling of micro-holes in Cf/SiC composites, coupled with nanosecond laser drilling in air for fabricating micro-holes with high aspect ratios, were investigated. The surface morphology, reaction products, and micro-hole shapes were thoroughly examined. The results reveal that, for the coaxial waterjet-assisted nanosecond laser drilling of micro-holes in the Cf/SiC composite, the increasing of waterjet velocity enhances the material removal rate and micro-hole depth, but reduces the micro-hole diameter and taper angle. The coaxial waterjet isolates the laser-ablated region and cools down the corresponding region rapidly, leading to the formation of a mixture of SiC, SiO2, and Si on the surface. As the coaxial waterjet velocity increases, the morphology of residual surface products changes from a net-like structure to individual spheres. Coaxial waterjet-assisted nanosecond laser drilling, with a waterjet velocity of 9.61 m/s, achieves micro-holes with a good balance between efficiency and quality. For the fabrication of micro-holes with a high aspect ratio in Cf/SiC composites, micro-holes fabricated by nanosecond laser drilling in air exhibit obvious taper features, which should be ascribed to the combined effects of spattering slag, plasma, and energy dissipation. The application of coaxial waterjet-assisted nanosecond laser drilling on micro-holes fabricated by laser drilling in air effectively expands the hole diameter. The fabricated micro-holes have very small taper angles, with clean wall surfaces and almost no reaction products. This approach, combining nanosecond laser drilling in air followed by coaxial waterjet-assisted nanosecond laser drilling, offers a promising technique for fabricating high-quality micro-holes with high aspect ratios in Cf/SiC composites.

Schlagwörter

Stichwörter der Autor:innen

Cf/SiC compositesablation mechanismcoaxial waterjet-assisted nanosecond laser drillingmicro-holes with high aspect ratioswaterjet velocity

Autor:innen und Institutionen

  • Department of Mechanical and Automotive Engineering, South China University of Technology, Guangzhou 510641, China.
  • PKU-HKUST Shenzhen-Hong Kong Institution, Shenzhen 518057, China.
  • Shenzhen Institute, Peking University, Shenzhen 518057, China.
  • Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences, Ningbo 315201, China.
  • Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China.

ORCID-Profile: Yue Cao, Liyuan Sheng

Förderung

  • Shenzhen Science and Technology Program
  • Director's Fund of Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences
  • IER foundation
  • Director’s Fund of the Ningbo Institute of Materials Technology and Engineering, Chinese Academy of Sciences

Zitieren

APA

Yuan, C., Bian, Z., Cao, Y., Xiao, Y., Wang, B., Guo, J., & Sheng, L. (2025). Fabrication of Micro-Holes with High Aspect Ratios in Cf/SiC Composites Using Coaxial Waterjet-Assisted Nanosecond Laser Drilling. Micromachines, 16(7), 811. https://doi.org/10.3390/mi16070811

Vancouver

Yuan C, Bian Z, Cao Y, Xiao Y, Wang B, Guo J, et al. Fabrication of Micro-Holes with High Aspect Ratios in Cf/SiC Composites Using Coaxial Waterjet-Assisted Nanosecond Laser Drilling. Micromachines. 2025;16(7):811. doi:10.3390/mi16070811

BibTeX
@article{Yuan2025,
  author = {Yuan, Chenhu and Bian, Zenggan and Cao, Yue and Xiao, Yinan and Wang, Bin and Guo, Jianting and Sheng, Liyuan},
  title = {Fabrication of Micro-Holes with High Aspect Ratios in Cf/SiC Composites Using Coaxial Waterjet-Assisted Nanosecond Laser Drilling},
  journal = {Micromachines},
  year = {2025},
  volume = {16},
  number = {7},
  pages = {811},
  doi = {10.3390/mi16070811}
}
Kostenlos starten →