Temperature Compensation Method for MEMS Ring Gyroscope Based on PSO-TVFEMD-SE-TFPF and FTTA-LSTM
Micromachines · 26.04.2025 · 16 (5) · 507
DOI: 10.3390/mi16050507 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 26.04.2025. Verfasst von Hongqiao Huang und 5 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Instrumentation Science & Dynamic Measurement, Ministry of Education, North University of China, Taiyuan 030051, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: This work is supported by National Key Research and Development Program of China., National Natural Science Foundation of China, National Key Research and Development Program of China.
Abstract (Originalsprache)
This study proposes a novel parallel denoising and temperature compensation fusion algorithm for MEMS ring gyroscopes. First, the particle swarm optimization (PSO) algorithm is used to optimize the time-varying filter-based empirical mode decomposition (TVFEMD), obtaining optimal decomposition parameters. Then, TVFEMD decomposes the gyroscope output signal into a series of product function (PF) signals and a residual signal. Next, sample entropy (SE) is employed to classify the decomposed signals into three categories: noise segment, mixed segment, and feature segment. According to the parallel model structure, the noise segment is directly discarded. Meanwhile, time–frequency peak filtering (TFPF) is applied to denoise the mixed segment, while the feature segment undergoes compensation. For compensation, the football team training algorithm (FTTA) is used to optimize the parameters of the long short-term memory (LSTM) neural network, forming a novel FTTA-LSTM architecture. Both simulations and experimental results validate the effectiveness of the proposed algorithm. After processing the MEMS gyroscope output signal using the PSO-TVFEMD-SE-TFPF denoising algorithm and the FTTA-LSTM temperature drift compensation model, the angular random walk (ARW) of the MEMS gyroscope is reduced to 0.02°/√h, while the bias instability (BI) decreases to 2.23°/h. Compared to the original signal, ARW and BI are reduced by 99.43% and 97.69%, respectively. The proposed fusion-based temperature compensation method significantly enhances the temperature stability and noise performance of the gyroscope.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Key Laboratory of Instrumentation Science & Dynamic Measurement, Ministry of Education, North University of China, Taiyuan 030051, China.
- National Institute of Metrology, China, 18 North Third Ring East Road, Chaoyang District, Beijing 100029, China.
- Mechanized Infantry Reconnaissance Department, The Army Infantry Academy of PLA, Shijiazhuang 050083, China.
- School of Microelectronics, University of Science and Technology of China, Hefei 230022, China.
- Automobile NCO School, Army Military Transportation University, No. 1155 Yanshan Road, Yuhui District, Bengbu 233010, China.
ORCID-Profile: Hongqiao Huang, Huiliang Cao
Förderung
- This work is supported by National Key Research and Development Program of China.
- National Natural Science Foundation of China
- National Key Research and Development Program of China
Zitieren
APA
Huang, H., Ye, W., Liu, L., Wang, W., Wang, Y., & Cao, H. (2025). Temperature Compensation Method for MEMS Ring Gyroscope Based on PSO-TVFEMD-SE-TFPF and FTTA-LSTM. Micromachines, 16(5), 507. https://doi.org/10.3390/mi16050507
Vancouver
Huang H, Ye W, Liu L, Wang W, Wang Y, Cao H. Temperature Compensation Method for MEMS Ring Gyroscope Based on PSO-TVFEMD-SE-TFPF and FTTA-LSTM. Micromachines. 2025;16(5):507. doi:10.3390/mi16050507
BibTeX
@article{Huang2025,
author = {Huang, Hongqiao and Ye, Wen and Liu, Li and Wang, Wenjing and Wang, Yan and Cao, Huiliang},
title = {Temperature Compensation Method for MEMS Ring Gyroscope Based on PSO-TVFEMD-SE-TFPF and FTTA-LSTM},
journal = {Micromachines},
year = {2025},
volume = {16},
number = {5},
pages = {507},
doi = {10.3390/mi16050507}
}
EUVIMED