EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An In-Run Automatic Demodulation Phase Error Compensation Method for MEMS Gyroscope in Full Temperature Range

Jianpeng Wang, Gongliu Yang, Yi Zhou iD, Jiangyuan Zhang, Fumin Liu, Qingzhong Cai iD

Micromachines · 26.06.2024 · 15 (7) · 825

DOI: 10.3390/mi15070825 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 26.06.2024. Verfasst von Jianpeng Wang und 5 weiteren Autor:innen. Beteiligte Einrichtung: School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing 100191, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key R&D Program of China, National Key R&D Program of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The demodulation phase error will cause the quadrature error to be coupled to the rate output, resulting in performance deterioration of the MEMS gyroscope. To solve this problem, an in-run automatic demodulation phase error compensation method is proposed in this paper. This method applies square wave angular rate input to the gyroscope and automatically identifies the value of the demodulation phase error through the designed automatic identification algorithm. To realize in-run automatic compensation, the demodulation phase error corresponding to the temperature point is measured every 10 °C in the full-temperature environment (−40~60 °C). The relationship between temperature and demodulation phase error is fitted by a third-order polynomial. The temperature is obtained by the temperature sensor and encapsulated in the ceramic packages of the MEMS gyroscope, and the in-run automatic compensation is realized based on the fitting curve. The temperature hysteresis effect on the zero-rate output (ZRO) of the gyroscope is eliminated after compensation. The bias instability (BI) of the three gyroscopes at room temperature (25 °C) is reduced by four to eight times to 0.1°/h, while that at full-temperature environment (−40~60 °C) is reduced by three to four times to 0.1°/h after in-run compensation.

Schlagwörter

Stichwörter der Autor:innen

MEMS gyroscopebias instabilitydemodulation phase errorfull temperatureidentification and compensationin-run

Autor:innen und Institutionen

  • School of Instrumentation and Optoelectronic Engineering, Beihang University, Beijing 100191, China.
  • Beijing Institute of Aerospace Control Device, Beijing 100854, China.
  • Advanced Technology Research Institute, Zhejiang University, Hangzhou 310058, China.
  • School of Mechanical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China.
  • School of Instrument Science and Engineering, Southeast University, Nanjing 210018, China.

ORCID-Profile: Yi Zhou, Qingzhong Cai

Förderung

  • National Key R&D Program of China
  • National Key R&D Program of China

Zitieren

APA

Wang, J., Yang, G., Zhou, Y., Zhang, J., Liu, F., & Cai, Q. (2024). An In-Run Automatic Demodulation Phase Error Compensation Method for MEMS Gyroscope in Full Temperature Range. Micromachines, 15(7), 825. https://doi.org/10.3390/mi15070825

Vancouver

Wang J, Yang G, Zhou Y, Zhang J, Liu F, Cai Q. An In-Run Automatic Demodulation Phase Error Compensation Method for MEMS Gyroscope in Full Temperature Range. Micromachines. 2024;15(7):825. doi:10.3390/mi15070825

BibTeX
@article{Wang2024,
  author = {Wang, Jianpeng and Yang, Gongliu and Zhou, Yi and Zhang, Jiangyuan and Liu, Fumin and Cai, Qingzhong},
  title = {An In-Run Automatic Demodulation Phase Error Compensation Method for MEMS Gyroscope in Full Temperature Range},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {7},
  pages = {825},
  doi = {10.3390/mi15070825}
}
Kostenlos starten →