EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Fabrication of Sol Gel Solution-Based Zinc–Tin Oxide/Carbon Nanotube Hybrid Thin-Film for Thin-Film Transistors

Yong-Jae Kim, Woon-Seop Choi iD

Micromachines · 30.03.2025 · 16 (4) · 411

DOI: 10.3390/mi16040411 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 30.03.2025. Verfasst von Yong-Jae Kim und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Semiconductor Engineering, Hoseo University, Asan 31499, Republic of Korea. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 24 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea, Basic Science Research Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Solution-processed oxide thin-film transistors (TFTs) can lead to a significant cost-effective process and suitable for large-scale fabrication. However, they often face limitations, such as lower field-effect mobility, the use of indium which is toxic and rare, and degradation compared to vacuum-based technologies. The single-walled carbon nanotubes (SWNTs) were incorporated with zinc–tin oxide (ZTO) precursor solution without dispersants for the device’s active layer. Sol–gel solution-based ZTO/single-wall carbon nanotube (ZTO/SWNT) (TFTs) with various SWNT concentrations were fabricated to improve the performance of ZTO TFTs. ZTO TFTs containing SWNTs exhibited better electrical performance than those without SWNTs. Among the samples, the ZTO TFT with an SWNT concentration of 0.07 wt.% showed a field-effect mobility (μsat) of 13.12 cm2/Vs (increased by a factor of 3) and an Ion/Ioff current ratio of 7.66 × 107 with a lower threshold voltage. SWNTs in the ZTO/SWNTs acted as carrier transfer rods, playing a crucial role in controlling the electrical performance of ZTO TFTs. The proposed fabrication of a sol–gel solution-based process is highly compatible with existing processes because it brings ZTO/SWNT hybrid TFTs closer to practical application, opening up the possibilities for next-generation electronics in flexible devices and low-cost manufacturing.

Schlagwörter

Stichwörter der Autor:innen

oxide TFTsingle-walled carbon nanotubesolution-processedsol–gel

Autor:innen und Institutionen

  • Department of Semiconductor Engineering, Hoseo University, Asan 31499, Republic of Korea.

ORCID-Profile: Woon-Seop Choi

Förderung

  • National Research Foundation of Korea
  • Basic Science Research Program

Zitieren

APA

Kim, Y. J., & Choi, W. S. (2025). Fabrication of Sol Gel Solution-Based Zinc–Tin Oxide/Carbon Nanotube Hybrid Thin-Film for Thin-Film Transistors. Micromachines, 16(4), 411. https://doi.org/10.3390/mi16040411

Vancouver

Kim YJ, Choi WS. Fabrication of Sol Gel Solution-Based Zinc–Tin Oxide/Carbon Nanotube Hybrid Thin-Film for Thin-Film Transistors. Micromachines. 2025;16(4):411. doi:10.3390/mi16040411

BibTeX
@article{Kim2025,
  author = {Kim, Yong-Jae and Choi, Woon-Seop},
  title = {Fabrication of Sol Gel Solution-Based Zinc–Tin Oxide/Carbon Nanotube Hybrid Thin-Film for Thin-Film Transistors},
  journal = {Micromachines},
  year = {2025},
  volume = {16},
  number = {4},
  pages = {411},
  doi = {10.3390/mi16040411}
}
Kostenlos starten →