EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Defect Density of States of Tin Oxide and Copper Oxide p ‐type Thin‐film Transistors

Måns J. Mattsson, Kham M. Niang, Jared Parker, David J. Meeth, John F. Wager, Andrew J. Flewitt, Matt W. Graham

Advanced Electronic Materials · 2025-07 · 11 (11)

DOI: 10.1002/aelm.202400929 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advanced Electronic Materials, online erschienen am 03.03.2025. Verfasst von Måns J. Mattsson und 6 weiteren Autor:innen. Die Arbeit wurde bisher 16-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Engineering and Physical Sciences Research Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The complete subgap defect density of states (DoS) is measured using the ultrabroadband (0.15 to 3.5 eV) photoconduction response from p‐type thin‐film transistors (TFTs) of tin oxide, SnO, and copper oxide, Cu 2 O. The resulting TFT photoconduction spectra clearly resolve bandgaps that show the presence of interfacial and oxidized minority phases. In tin oxide, the SnO majority phase has a small 0.68 eV bandgap enabling ambipolar or p‐mode TFT operation. By contrast, in copper oxide TFTs, an oxidized minority phase with a 1.4 eV bandgap corresponding to CuO greatly reduces the channel hole mobility at the charge accumulation region. Three distinct subgap DoS peaks are resolved for the copper oxide TFT and are best ascribed to copper vacancies, oxygen‐on‐copper antisites, and oxygen interstitials. For tin oxide TFTs, five subgap DoS peaks are observed and are similarly linked to tin vacancies, oxygen vacancies, and oxygen interstitials. To achieve desirable unipolar p‐mode TFTs, the conduction band‐edge defect density of oxygen interstitials must be sufficiently large to suppress n‐mode conduction. In both channel materials, the metal vacancy peak densities near the valence band edge determine the hole concentrations, which then predict the TFT Fermi level energy, observed on‐off ratios, and threshold voltages.

Förderung

  • Engineering and Physical Sciences Research Council

Zitieren

APA

Mattsson, M. J., Niang, K. M., Parker, J., Meeth, D. J., Wager, J. F., Flewitt, A. J., & Graham, M. W. (2025). Defect Density of States of Tin Oxide and Copper Oxide p ‐type Thin‐film Transistors. Advanced Electronic Materials, 11(11). https://doi.org/10.1002/aelm.202400929

Vancouver

Mattsson MJ, Niang KM, Parker J, Meeth DJ, Wager JF, Flewitt AJ, et al. Defect Density of States of Tin Oxide and Copper Oxide p ‐type Thin‐film Transistors. Advanced Electronic Materials. 2025;11(11). doi:10.1002/aelm.202400929

BibTeX
@article{Mattsson2025,
  author = {Mattsson, Måns J. and Niang, Kham M. and Parker, Jared and Meeth, David J. and Wager, John F. and Flewitt, Andrew J. and Graham, Matt W.},
  title = {Defect Density of States of Tin Oxide and Copper Oxide p ‐type Thin‐film Transistors},
  journal = {Advanced Electronic Materials},
  year = {2025},
  volume = {11},
  number = {11},
  doi = {10.1002/aelm.202400929}
}
Kostenlos starten →