EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electrical Characterization of Cost-Effective Screen-Printed Sensors Based on Thermoplastic Polyurethane, Polyimide, and Polyethylene Terephthalate

Muhammad Faiz Ul Hassan, Yan Wang iD, Kai Yang, Yading Wen, Shichao Jin iD, Yi Zhang, Xiaosheng Zhang iD

Micromachines · 10.03.2025 · 16 (3) · 319

DOI: 10.3390/mi16030319 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 10.03.2025. Verfasst von Muhammad Faiz Ul Hassan und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Integrated Circuit Science and Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the National Key Research and Development Program of China, the National Natural Science Foundation of China, the Key R&D Program of Mianyang.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In recent years, the improvement in living standards and the corresponding increase in quality-of-life expectations have significantly increased the demand for advanced electronic products. This trend has generated great interest in human health monitoring and extensive research efforts. Flexible sensors in particular are being given preference because of their high extensibility, excellent biocompatibility properties, low weight, and low cost. In the present work, we took this idea further and designed flexible sensors using different substrates such as thermoplastic polyurethane (TPU), polyimide (PI), and polyethylene terephthalate (PET), fabricating them with silver paste ink using screen-printing technology. A uniform and homogeneous conductive layer was formed, which was identified through Scanning Electron Microscopy (SEM) analysis. Additionally, the width of the printed silver paste ink was approximately 100 µm. This study contributes to the design and fabrication of a new generation of flexible sensors for health monitoring. The results demonstrate that these sensors are technically possible as part of long-term wearable health-monitoring solutions for wearable health care technologies.

Schlagwörter

Stichwörter der Autor:innen

flexible electronicsscreen printingstrain sensorsthermoplastic polyurethane (TPU)wearable electronics

Autor:innen und Institutionen

  • School of Integrated Circuit Science and Engineering, University of Electronic Science and Technology of China, Chengdu 611731, China.

ORCID-Profile: Yan Wang, Shichao Jin, Xiaosheng Zhang

Förderung

  • the National Key Research and Development Program of China
  • the National Natural Science Foundation of China
  • the Key R&D Program of Mianyang
  • the Key R&D Program of Sichuan Province
  • the Sichuan Science and Technology Program
  • the Key R&D Program of Mianyang
  • the Key R&D Program of Sichuan Province

Zitieren

APA

Hassan, M. F. U., Wang, Y., Yang, K., Wen, Y., Jin, S., Zhang, Y., & Zhang, X. (2025). Electrical Characterization of Cost-Effective Screen-Printed Sensors Based on Thermoplastic Polyurethane, Polyimide, and Polyethylene Terephthalate. Micromachines, 16(3), 319. https://doi.org/10.3390/mi16030319

Vancouver

Hassan MFU, Wang Y, Yang K, Wen Y, Jin S, Zhang Y, et al. Electrical Characterization of Cost-Effective Screen-Printed Sensors Based on Thermoplastic Polyurethane, Polyimide, and Polyethylene Terephthalate. Micromachines. 2025;16(3):319. doi:10.3390/mi16030319

BibTeX
@article{Hassan2025,
  author = {Hassan, Muhammad Faiz Ul and Wang, Yan and Yang, Kai and Wen, Yading and Jin, Shichao and Zhang, Yi and Zhang, Xiaosheng},
  title = {Electrical Characterization of Cost-Effective Screen-Printed Sensors Based on Thermoplastic Polyurethane, Polyimide, and Polyethylene Terephthalate},
  journal = {Micromachines},
  year = {2025},
  volume = {16},
  number = {3},
  pages = {319},
  doi = {10.3390/mi16030319}
}
Kostenlos starten →