EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design of Dielectric Elastomer Actuator and Its Application in Flexible Gripper

Xiaoyu Meng, Jiaqing Xie iD, Haoran Pang, Wenchao Wei, Jiping Niu, Mingqiang Zhu iD, Fang Gu, Xiaohuan Fan, Haiyan Fan

Micromachines · 19.01.2025 · 16 (1) · 107

DOI: 10.3390/mi16010107 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 19.01.2025. Verfasst von Xiaoyu Meng und 8 weiteren Autor:innen. Beteiligte Einrichtung: College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling 712100, China. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Natural Science Basic Research Program of Shaanxi.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Dielectric elastomer actuators (DEAs) are difficult to apply to flexible grippers due to their small deformation range and low output force. Hence, a DEA with a large bending deformation range and output force was designed, and a corresponding flexible gripper was developed to realize the function of grasping objects of different shapes. The relationship between the pre-stretch ratio and DEA deformation degree was tested by experiments. Based on the performance test results of the dielectric elastomer (DE), the bending deformation process of DEAs with different shapes was simulated by Finite Element Method (FEM) simulation. DEAs with different shapes were prepared through laser cutting and the relationship between the voltage and the bending angle, and the output force of the DEAs was measured. The result shows that under uniaxial stretching, the deformation of the DEA in the stretching direction gradually increases and decreases in the unstretched direction with the increase in the pre-stretch ratio. Under biaxial stretching, DEA deformation increases with the increase in the pre-stretch ratio. The shape of the DEA has a certain influence on the bending deformation range under the same conditions, and the elliptical DEA has a larger bending deformation range and higher output force compared with the rectangular DEA and the trapezium DEA. The elliptical DEA can produce a bending deformation of 40° and an output force of 37.2 mN at a voltage of 24 kV. The three-finger flexible gripper composed of an elliptical DEA can realize the grasping of a paper cup.

Schlagwörter

Stichwörter der Autor:innen

bending rangedielectric elastomer actuatorpre-stretchshape designsoft gripper

Autor:innen und Institutionen

  • College of Mechanical and Electronic Engineering, Northwest A&F University, Yangling 712100, China.
  • College of Water Resources and Architectural Engineering, Northwest A&F University, Yangling 712100, China.
  • Guangdong Association of Environmental Protecion Industry, Guangzhou 510045, China.
  • Zhejiang Sunny Optical Company, Yuyao 315400, China.

ORCID-Profile: Jiaqing Xie, Mingqiang Zhu

Förderung

  • National Natural Science Foundation of China
  • Natural Science Basic Research Program of Shaanxi

Zitieren

APA

Meng, X., Xie, J., Pang, H., Wei, W., Niu, J., Zhu, M., Gu, F., Fan, X., & Fan, H. (2025). Design of Dielectric Elastomer Actuator and Its Application in Flexible Gripper. Micromachines, 16(1), 107. https://doi.org/10.3390/mi16010107

Vancouver

Meng X, Xie J, Pang H, Wei W, Niu J, Zhu M, et al. Design of Dielectric Elastomer Actuator and Its Application in Flexible Gripper. Micromachines. 2025;16(1):107. doi:10.3390/mi16010107

BibTeX
@article{Meng2025,
  author = {Meng, Xiaoyu and Xie, Jiaqing and Pang, Haoran and Wei, Wenchao and Niu, Jiping and Zhu, Mingqiang and Gu, Fang and Fan, Xiaohuan and Fan, Haiyan},
  title = {Design of Dielectric Elastomer Actuator and Its Application in Flexible Gripper},
  journal = {Micromachines},
  year = {2025},
  volume = {16},
  number = {1},
  pages = {107},
  doi = {10.3390/mi16010107}
}
Kostenlos starten →