Research on design of soft gripper by dielectric elastomer actuator based on quadrangular star honeycomb support
PLOS One · 15.07.2026 · 21 (7) · e0352654
DOI: 10.1371/journal.pone.0352654 ↗Kurz gefasst
Fachartikel in der Zeitschrift PLOS One, online erschienen am 15.07.2026. Verfasst von Yuanlin Guan und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical and Automotive Engineering, Qingdao University of Technology, Qingdao, Shandong, China. Hauptthemen laut MEDLINE: Equipment Design, Elastomers, Robotics. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Shandong Province, Natural Science Foundation of Qingdao, Shandong Province Science and Technology SMES Innovation Ability Enhancement Project.
Abstract (Originalsprache)
This study proposes a soft gripper with dielectric elastomer actuator (DEA) and 3D printing quadrilateral star honeycomb support due to the insufficient structural stiffness when grasping irregular objects. According to the bending requirement of the soft gripper and the electrostrictive properties of the dielectric elastomer (DE), a quadrangular star honeycomb structure with zero Poisson’s ratio is proposed as the supporting structure for the soft gripper to enhance its stiffness. The mechanical properties of the honeycomb structure were analyzed via the finite element method (FEM) to improve its stress and horizontal compression displacement. By discussing different parameters such as the pre-stretching ratio of the dielectric elastomer and the pre-compression displacement of the honeycomb structure, we analyzed their influence on the bending displacement performance of the soft gripper. The performance of the soft grippers was verified through both simulations and experiments. The improvement soft gripper, composed of two-layer of dielectric elastomer with a 300% pre-stretching ratio and a honeycomb structure subjected to 20 mm pre-compression, exhibits a bending displacement of 13 mm on a voltage of 5000 V and can grasp objects weighting 5 g.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- School of Mechanical and Automotive Engineering, Qingdao University of Technology, Qingdao, Shandong, China.
- College of Computer Science and Technology, Qingdao University, Qingdao, Shandong, China.
ORCID-Profile: Yuanlin Guan
Förderung
- Natural Science Foundation of Shandong Province
- Natural Science Foundation of Qingdao
- Shandong Province Science and Technology SMES Innovation Ability Enhancement Project
Zitieren
APA
Guan, Y., Liu, Z., Cheng, Q., Yang, X., Yu, C., Cheng, Y., & Gu, X. (2026). Research on design of soft gripper by dielectric elastomer actuator based on quadrangular star honeycomb support. PLOS One, 21(7), e0352654. https://doi.org/10.1371/journal.pone.0352654
Vancouver
Guan Y, Liu Z, Cheng Q, Yang X, Yu C, Cheng Y, et al. Research on design of soft gripper by dielectric elastomer actuator based on quadrangular star honeycomb support. PLOS One. 2026;21(7):e0352654. doi:10.1371/journal.pone.0352654
BibTeX
@article{Guan2026,
author = {Guan, Yuanlin and Liu, Ziyin and Cheng, Qi and Yang, Xixin and Yu, Chunyu and Cheng, Yibo and Gu, Xunzhe},
title = {Research on design of soft gripper by dielectric elastomer actuator based on quadrangular star honeycomb support},
journal = {PLOS One},
year = {2026},
volume = {21},
number = {7},
pages = {e0352654},
doi = {10.1371/journal.pone.0352654}
}
EUVIMED