Performing Magnetic Boundary Modulation to Broaden the Operational Wind Speed Range of a Piezoelectric Cantilever-Type Wind Energy Harvester
Micromachines · 23.10.2024 · 15 (11) · 1286
DOI: 10.3390/mi15111286 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 23.10.2024. Verfasst von Feng-Rui Liu und 5 weiteren Autor:innen. Beteiligte Einrichtung: Shanghai Key Laboratory of Aerospace Intelligent Control Technology, Shanghai Aerospace Control Technology Institute, Shanghai 201109, China. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
Small piezoelectric wind-induced vibration energy harvesting systems have been widely studied to provide long-term sustainable green energy for a large number of wireless sensor network nodes. Piezoelectric materials are commonly utilized as transducers because of their ability to produce high output power density and their simple structure, but they are prone to material fracture under large deformation conditions. This paper proposes a magnetic boundary modulated stepped beam wind energy harvesting system. On the one hand, the design incorporates a composite stepped beam with both high- and low-stiffness components, allowing for efficient vibration and electrical energy output at low wind speeds. On the other hand, a magnetic boundary constraint mechanism is constructed to prevent the piezoelectric sheet from breaking due to excessive deformation. Experiments have confirmed that the effective operational wind speed range of the harvester with magnetic boundary constraints is doubled compared to that of the harvester without magnetic boundary constraints. Furthermore, by adjusting the magnetic pole spacing of the boundary, the harvesting system can generate sufficiently high output power under high-wind-speed conditions without damaging the piezoelectric sheet.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Shanghai Key Laboratory of Aerospace Intelligent Control Technology, Shanghai Aerospace Control Technology Institute, Shanghai 201109, China.
- State Key Laboratory of Mechanical System and Vibration, School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200240, China.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Liu, F. R., Zhao, L. C., Yan, G., Zhang, W. M., Wu, Z. Y., & Zhang, X. L. (2024). Performing Magnetic Boundary Modulation to Broaden the Operational Wind Speed Range of a Piezoelectric Cantilever-Type Wind Energy Harvester. Micromachines, 15(11), 1286. https://doi.org/10.3390/mi15111286
Vancouver
Liu FR, Zhao LC, Yan G, Zhang WM, Wu ZY, Zhang XL. Performing Magnetic Boundary Modulation to Broaden the Operational Wind Speed Range of a Piezoelectric Cantilever-Type Wind Energy Harvester. Micromachines. 2024;15(11):1286. doi:10.3390/mi15111286
BibTeX
@article{Liu2024,
author = {Liu, Feng-Rui and Zhao, Lin-Chuan and Yan, Ge and Zhang, Wen-Ming and Wu, Zhi-Yuan and Zhang, Xiao-Long},
title = {Performing Magnetic Boundary Modulation to Broaden the Operational Wind Speed Range of a Piezoelectric Cantilever-Type Wind Energy Harvester},
journal = {Micromachines},
year = {2024},
volume = {15},
number = {11},
pages = {1286},
doi = {10.3390/mi15111286}
}
EUVIMED