Dragonfly-Wing-Inspired Bluff-Body Piezoelectric Harvester for Efficient Low-Wind-Speed Energy Harvesting
Micromachines · 20.03.2026 · 17 (3) · 380
DOI: 10.3390/mi17030380 ↗Kurz gefasst
Fachartikel in der Zeitschrift Micromachines, online erschienen am 20.03.2026. Verfasst von Zhiyong Zhou und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil and Architectural Engineering, Henan University, Kaifeng 475004, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: zhiyongzhou, National Natural Science Foundation of China, Natural Science Foundation of Henan Province, China.
Abstract (Originalsprache)
Inspired by the wing-opening morphology of dragonflies, a series of bio-inspired dragonfly-shaped bluff bodies are designed and investigated, and further integrated into a piezoelectric wind energy harvester. The energy-harvesting performance and aerodynamic responses of bluff-body configurations with different wing-opening angles (0°, 15°, 30°, 45°, and 60°) are comparatively analyzed through a combination of numerical simulations and wind tunnel experiments. Experimental results demonstrate pronounced differences among the configurations in the low wind speed regime. Specifically, the prototype with α = 0° achieves relatively higher output under very low wind speeds, whereas the α = 15° configuration exhibits the best overall performance across the entire tested wind speed range. Taking the α = 15° case as an example, the cut-in wind speed is reduced to 1.7 m/s, while the maximum RMS voltage and output power are increased by 20.16% and 44.39% compared with the cuboid bluff body, and by 50.95% and 127.84% compared with the cylinder bluff body, respectively. Further CFD results reveal that, at specific wing-opening angles, the dragonfly-shaped bluff body undergoes a coupled vortex-induced vibration (VIV) and galloping response, enabling certain configurations to sustain stable oscillations with large amplitudes over a relatively wide wind speed range. Within the investigated parameter range, an appropriate selection of the wing-opening angle effectively balances the cut-in capability and output stability under low wind speed conditions. These findings provide useful design guidelines for flow-induced vibration-based wind energy harvesters operating in low wind speed environments.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Civil and Architectural Engineering, Henan University, Kaifeng 475004, China.
- AVIC Nanjing Engineering Institute of Aircraft Systems, Nanjing 211106, China.
ORCID-Profile: Zhiyong Zhou
Förderung
- zhiyongzhou
- National Natural Science Foundation of China
- Natural Science Foundation of Henan Province, China
Zitieren
APA
Zhou, Z., Shang, X., Xia, Y., & Zhu, P. (2026). Dragonfly-Wing-Inspired Bluff-Body Piezoelectric Harvester for Efficient Low-Wind-Speed Energy Harvesting. Micromachines, 17(3), 380. https://doi.org/10.3390/mi17030380
Vancouver
Zhou Z, Shang X, Xia Y, Zhu P. Dragonfly-Wing-Inspired Bluff-Body Piezoelectric Harvester for Efficient Low-Wind-Speed Energy Harvesting. Micromachines. 2026;17(3):380. doi:10.3390/mi17030380
BibTeX
@article{Zhou2026,
author = {Zhou, Zhiyong and Shang, Xinyu and Xia, Yebao and Zhu, Pei},
title = {Dragonfly-Wing-Inspired Bluff-Body Piezoelectric Harvester for Efficient Low-Wind-Speed Energy Harvesting},
journal = {Micromachines},
year = {2026},
volume = {17},
number = {3},
pages = {380},
doi = {10.3390/mi17030380}
}
EUVIMED