EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Quality Spherical Silver Alloy Powder for Laser Powder Bed Fusion Using Plasma Rotating Electrode Process

Hao Li, Shenghuan Zhang, Qiaoyu Chen, Zhaoyang Du, Xingyu Chen, Xiaodan Chen, Shiyi Zhou, Shuwen Mei, Linda Ke, Qinglei Sun, Zuowei Yin, Jie Yin iD und 1 weitere

Micromachines · 14.03.2024 · 15 (3) · 396

DOI: 10.3390/mi15030396 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Micromachines, online erschienen am 14.03.2024. Verfasst von Hao Li und 12 weiteren Autor:innen. Beteiligte Einrichtung: Gemmological Institute, China University of Geosciences, Wuhan 430074, China. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Knowledge Innovation Program of Wuhan-Basic Research, The National Natural Science Foundation of China, Natural Science Foundation Grant of Hubei Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The plasma rotating electrode process (PREP) is an ideal method for the preparation of metal powders such as nickel-based, titanium-based, and iron-based alloys due to its low material loss and good degree of sphericity. However, the preparation of silver alloy powder by PREP remains challenging. The low hardness of the mould casting silver alloy leads to the bending of the electrode rod when subjected to high-speed rotation during PREP. The mould casting silver electrode rod can only be used in low-speed rotation, which has a negative effect on particle refinement. This study employed continuous casting (CC) to improve the surface hardness of S800 Ag (30.30% higher than mould casting), which enables a high rotation speed of up to 37,000 revolutions per minute, and silver alloy powder with an average sphericity of 0.98 (5.56% higher than gas atomisation) and a sphericity ratio of 97.67% (36.28% higher than gas atomisation) has been successfully prepared. The dense S800 Ag was successfully fabricated by laser powder bed fusion (LPBF), which proved the feasibility of preparing high-quality powder by the “CC + PREP” method. The samples fabricated by LPBF have a Vickers hardness of up to 271.20 HV (3.66 times that of mould casting), leading to a notable enhancement in the strength of S800 Ag. In comparison to GA, the S800 Ag powder prepared by “CC + PREP” exhibits greater sphericity, a higher sphericity ratio and less satellite powder, which lays the foundation for dense LPBF S800 Ag fabrication.

Schlagwörter

Stichwörter der Autor:innen

Ag alloycontinuous castinghardnesslaser powder bed fusionplasma rotating electrode process

Autor:innen und Institutionen

  • Gemmological Institute, China University of Geosciences, Wuhan 430074, China.
  • Hubei Engineering Research Centre of Jewellery, Wuhan 430074, China.
  • Key Laboratory of Superlight Materials and Surface Technology, Ministry of Education, College of Materials Science and Chemical Engineering, Harbin Engineering University, Harbin 150001, China.
  • Nantong Jinyuan Intelligence Manufacturing Technology Co., Ltd., Nantong 226010, China.
  • Shanghai Engineering Technology Research Centre of Near-Net-Shape Forming for Metallic Materials, Shanghai Spaceflight Precision Machinery Institute, Shanghai 201600, China.

ORCID-Profile: Jie Yin, Zheng Li

Förderung

  • Knowledge Innovation Program of Wuhan-Basic Research
  • The National Natural Science Foundation of China
  • Natural Science Foundation Grant of Hubei Province
  • China Postdoctoral Science Foundation
  • Fundamental Research Funds for the Central Universities, China University of Geosciences, Wuhan
  • Guangdong Basic and Applied Basic Research Foundation
  • Postdoctoral Creative Research Post of Hubei Province, Guiding project of Scientific Research Plan of Education Department of Hubei Province
  • National Natural Science Foundation of China

Zitieren

APA

Li, H., Zhang, S., Chen, Q., Du, Z., Chen, X., Chen, X., Zhou, S., Mei, S., Ke, L., Sun, Q., Yin, Z., Yin, J., & Li, Z. (2024). High-Quality Spherical Silver Alloy Powder for Laser Powder Bed Fusion Using Plasma Rotating Electrode Process. Micromachines, 15(3), 396. https://doi.org/10.3390/mi15030396

Vancouver

Li H, Zhang S, Chen Q, Du Z, Chen X, Chen X, et al. High-Quality Spherical Silver Alloy Powder for Laser Powder Bed Fusion Using Plasma Rotating Electrode Process. Micromachines. 2024;15(3):396. doi:10.3390/mi15030396

BibTeX
@article{Li2024,
  author = {Li, Hao and Zhang, Shenghuan and Chen, Qiaoyu and Du, Zhaoyang and Chen, Xingyu and Chen, Xiaodan and Zhou, Shiyi and Mei, Shuwen and Ke, Linda and Sun, Qinglei and Yin, Zuowei and Yin, Jie and Li, Zheng},
  title = {High-Quality Spherical Silver Alloy Powder for Laser Powder Bed Fusion Using Plasma Rotating Electrode Process},
  journal = {Micromachines},
  year = {2024},
  volume = {15},
  number = {3},
  pages = {396},
  doi = {10.3390/mi15030396}
}
Kostenlos starten →